Atlas Copco ZR 30 VSD (FF VSD⁺) Oil-free Tooth Air Compressor

(1 opinión del cliente)

$15,000.00

The Atlas Copco ZR 30 VSD is the water-cooled 30 kW oil-free tooth compressor documented as a VSD⁺ machine with 8.6 and 10 bar(e) classes at 66 dB(A) and optional Energy Recovery delivering hot water up to 90°C. Send us your working pressure and cooling-water details, and our team will confirm the right build before preparing the Atlas Copco ZR 30 VSD quotation.

Consulta
Presión máxima de trabajo en bar(e)
10
Presión máxima de trabajo en psig
150
Motor instalado
30 kW
Potencia del motor instalado
40 hp
Capacidad FAD l/s
35 - 94
Capacidad FAD m³/min
2.1 - 5.6
Nivel de ruido
66 dB(A)
Dimensiones (largo × ancho × alto)
2005 × 1022 × 1909 mm
País de origen
CN
Código SA
8414804990
Plazos de entrega
2-4 semanas
MOQ
1 Unidad
Embalaje
Caja de madera
Calidad del producto
100% Genuino, 100% Original, A estrenar
Modo Transacción
CFR, CIF, CIP, CPT, DAP, DDP, EXW, FCA
Pago seguro garantizado

The Atlas Copco ZR 30 VSD occupies a specific corner of the oil-free tooth range: it is the water-cooled 30 kW frame whose variable-speed documentation exists as a VSD⁺ machine, printed with two pressure classes on the same chassis. The catalogue’s water-cooled VSD table lists no standard 30 kW row at all — the ZR 37 VSD and ZR 55 VSD occupy the adjacent slots — so every ZR 30 VSD order is built on the VSD⁺ platform of the ZR/ZT 30-50 family, with its permanent-magnet drive and both 8.6 and 10 bar(e) classes at 66 dB(A).

For plants with cooling water on site, this concentrates the whole speed story into one tier and leaves the heat balance as the real design decision, because the water-cooled build can route recovered compression heat into a hot water circuit up to 90°C.

Atlas Copco ZR 30 VSD⁺ (1)
Atlas Copco ZR 30 VSD⁺ (1)

The ZR 30 VSD⁺ — 8.6 bar(e) Class

The 8.6 bar(e) class is measured across three rows with the motor rating printed once at 30 kW. At Minimum the machine opens at 4 bar(e) with 38–94 l/s, at the Effective point of 7 bar(e) it holds 37–92 l/s, and the Maximum row at 8.6 bar(e) closes at 36–72 l/s. The m³/min column runs 2.28–5.64 at Minimum and narrows to 2.16–4.32 at Maximum, and the noise level for the class is printed at 66 dB(A). In the imperial column the same class reads 58, 102 and 125 psig at the three points, with the drive rated at 40 hp.

Point Presión de trabajo (bar(e)) FAD (l/s) FAD (m³/min) Ruido en dB(A) psig column
Mínimo 4 38–94 2.28–5.64 66 58
Eficaz 7 37–92 2.22–5.52 66 102
Máximo 8.6 36–72 2.16–4.32 66 125
Atlas Copco ZR 30 VSD⁺ (2)
Atlas Copco ZR 30 VSD⁺ (2)

The ZR 30 VSD⁺ — 10 bar(e) Class

The second class keeps the same starting band at Minimum but accepts a larger flow penalty at the pressure ceiling. Minimum stays at 38–94 l/s over 4 bar(e), the Effective point at 9 bar(e) reads 37–92 l/s, and the Maximum row at 10 bar(e) closes at 35–62 l/s — a figure worth noting, because the 10 bar(e) ceiling takes away just over a quarter of this class’s top-end flow. The m³/min column runs 2.28–5.64 down to 2.10–3.72, the noise level remains 66 dB(A), and the imperial column prints 58, 130 and 150 psig, the highest Maximum pressure figure in the 30-50 VSD⁺ family at this frame size.

Point Presión de trabajo (bar(e)) FAD (l/s) FAD (m³/min) Ruido en dB(A) psig column
Mínimo 4 38–94 2.28–5.64 66 58
Eficaz 9 37–92 2.22–5.52 66 130
Máximo 10 35–62 2.10–3.72 66 150
Atlas Copco ZR 30 VSD⁺ (3)
Atlas Copco ZR 30 VSD⁺ (3)

Energy Recovery Turns Compression Heat into 90°C Hot Water

Water cooling changes what happens to the heat that air-cooled frames must blow into the room. On the ZR 30 VSD the optional Energy Recovery control unit diverts recovered compression heat into a water circuit, and the documentation states that hot water temperatures up to 90°C can be achieved. For a food plant that runs wash-down stations or a pharmaceutical site with cleaning-in-place loops, that output replaces boiler duty that would otherwise burn fuel hour after hour.

The recovery function is tied to the water-cooled version specifically, which is one of the practical reasons the 30 kW slot is documented as a water-cooled VSD⁺ machine rather than a generic air-cooled build. Sites without an immediate hot water consumer can still order the machine without the recovery option and gain the water-cooled acoustic benefit alone.

Atlas Copco ZR 30 VSD⁺ (4)
Atlas Copco ZR 30 VSD⁺ (4)

Weights, Dimensions and the North American CAGI Sheet

Physically the ZR 30 VSD follows the family table shared across the 30 and 37 kW frames: 1350 kg packed, 1610 kg as Full Feature with the iMD dryer and 1504 kg as Full Feature with the iD dryer. The envelope is 2005 × 1022 × 1909 mm, extending to 2440 mm in length for the Full Feature build. The dryer column reads ID / IMD, so the integrated treatment choice is open on both pressure classes.

North American buyers have an additional print to consult: the CAGI data sheet for the ZR 30 FLX VSD, dated 07-08-2025, lists a Drive Motor Nominal Rating of 40.2 & 40.2 hp at 96.3 percent efficiency, a full load operating pressure of 124.7 psig on the 8.6 bar(e) build and 145.0 psig on the 10 bar(e) build, capacity from 169.2 down to 74.9 acfm, and specific power from 21.9 to 25.0 kW per 100 acfm across the measured field of the 8.6 bar(e) sheet.

Artículo Valor
Pack weight 1350 kg
Full Feature (iMD) 1610 kg
Full Feature (iD) 1504 kg
Dimensions (mm) 2005 × 1022 × 1909
Full Feature length 2440 mm
Dryer builds ID / IMD

The CAGI sheet itself can be summarised line by line, and the two builds share every motor figure while differing only in pressure and the flow field that follows from it. Reading the printed rows in order gives the table below, which is the quickest way to compare the two pressure classes against any other CAGI-listed machine at identical test conditions.

CAGI row Printed value
Drive Motor Nominal Rating 40.2 & 40.2 hp
Drive Motor Nominal Efficiency 96.3 & 96.3 percent
Fan Motor Nominal Rating / Efficiency 1.3 hp / 54.0 percent
Full Load Operating Pressure 124.7 psig (8.6 bar(e)) / 145.0 psig (10 bar(e))
Capacity, Max to Min 169.2–74.9 acfm (8.6) / 133.8–75.3 acfm (10)
Specific Power, Max to Min 21.9–25.0 kW/100 acfm (8.6) / 25.4–28.1 kW/100 acfm (10)
Input Power, Max to Min 37.0–18.8 kW (8.6) / 33.9–21.2 kW (10)

Where the ZR 30 VSD Fits in a Plant

The natural home for this machine is a facility that already circulates cooling water and needs oil-free air at one of two pressures. Breweries and dairies fit the profile exactly: the 8.6 bar(e) class serves general service air at 92 l/s effective, while recovered heat at up to 90°C feeds cleaning loops that would otherwise run on steam or gas. Electronics plants with chilled water on site gain a different benefit — the water-cooled chassis holds the compressor room at 66 dB(A) without adding fan heat to the cooling load.

Because the frame shares its weight and footprint table with the 37 kW build, a growing plant can plan the pit, pad and pipe sizing once and step up later without re-engineering the room. The absence of a standard VSD row at this size is not a limitation in practice, since the VSD⁺ tier already spans both pressure classes and carries the family’s permanent-magnet drive — points we confirm for each ZR 30 VSD enquiry against the load profile the buyer sends us.

Questions Buyers Ask About the ZR 30 VSD

Why is there no standard VSD row for the water-cooled 30 kW frame? The catalogue’s water-cooled VSD table starts at the ZR 37 VSD, so the 30 kW build is documented exclusively on the VSD⁺ platform with its 8.6 and 10 bar(e) classes. Buyers who want the plain VSD drive at this size are directed to the air-cooled ZT30VSD instead.

What temperature can the recovered hot water reach? The Energy Recovery documentation prints up to 90°C on the water-cooled version. The output is sized around the compression heat of the 30 kW drive, so a plant considering the ZR 30 VSD should compare its wash-down or CIP draw against that band before ordering the recovery unit.

How does the 10 bar(e) class affect flow planning? The Maximum row of the 10 bar(e) class closes at 35–62 l/s, against 36–72 l/s on the 8.6 bar(e) class. Plants sizing a 10 bar(e) loop on the ZR 30 VSD should therefore work from the 62 l/s ceiling rather than assuming the 8.6 bar(e) figures carry over unchanged.

From the ZR 30 VSD to the ZR 37 VSD

One frame up, the water-cooled range changes character: the ZR 37 VSD gains an official standard VSD row of its own at 70 dB(A) alongside its VSD⁺ tier, lifting the minimum flow floor to 102.3 l/s at 4 bar(e). A plant whose demand has crept above the ZR 30 VSD’s 94 l/s ceiling therefore moves into a frame with a genuinely wider speed story, while keeping the same water-cooled Energy Recovery option. Send us your measured flow band and cooling-water temperature, and we will confirm which of the two frames holds your duty point with margin before preparing the quotation.

Peso 1350 kg
Dimensiones 200.5 × 102.2 × 190.9 cm
Presión máxima de trabajo en bar(e)

10

Presión máxima de trabajo en psig

150

Motor instalado

30 kW

Potencia del motor instalado

40 hp

Capacidad FAD l/s

35 – 94

Capacidad FAD m³/min

2.1 – 5.6

Nivel de ruido

66 dB(A)

Dimensiones (largo × ancho × alto)

2005 × 1022 × 1909 mm

País de origen

CN

Código SA

8414804990

Plazos de entrega

2-4 semanas

MOQ

1 Unidad

Embalaje

Caja de madera

Calidad del producto

100% Genuino, 100% Original, A estrenar

Modo Transacción

CFR, CIF, CIP, CPT, DAP, DDP, EXW, FCA

1 revisión para Atlas Copco ZR 30 VSD (FF VSD⁺) Oil-free Tooth Air Compressor

  1. 5
    (1 opinión del cliente)
    100% de clientes recomiendan este producto.
    5 Estrellas100%4 Estrellas0%3 Estrellas0%2 Estrellas0%1 Estrella0%
  2. Avatar de Kamil Z

    Kamil Z -

    We chose the Atlas Copco ZR 30 VSD because the water-cooled build freed us from ducting another 66 dB(A) machine into a cramped compressor room. The Energy Recovery unit now feeds 90°C hot water to our wash-down station, which shortened the boiler’s duty cycle noticeably. Flow at the effective 9 bar(e) point holds 92 l/s for our blow-moulding loop without complaint. The two pressure classes on one machine saved us from buying a separate booster.

    A 0 de 0 le resultó útil esta opinión
Añadir un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

También te puede gustar...

Atlas Copco ZR 30 VSD⁺ (1)
Atlas Copco ZR 30 VSD (FF VSD⁺) Oil-free Tooth Air Compressor

$15,000.00

Consulta