Categorias de produtos:
Atlas Copco ZR 37 VSD (FF VSD⁺) Oil-free Tooth Air Compressor
$15,000.00
Tell us your required pressure and daily air consumption, and we will verify whether the Atlas Copco ZR 37 VSD or its VSD⁺ variant fits your plant and return a confirmed quotation. Water-cooled 37 kW oil-free tooth air with the ZR37VSD-8.6 at 70 dB(A) or the ZR 37 VSD⁺ classes is only one message away.
Water Cooling Comes to the 37 kW Tooth Range
The Atlas Copco ZR 37 VSD is the water-cooled member of the 37 kW slot in the oil-free tooth compressor family, and it holds a distinction that its larger sibling lacks: the official ZR37VSD-8.6 standard VSD build exists at this size, listed at 70 dB(A) and 1372 kg. On top of that baseline, the ZR 37 VSD⁺ extends the frame into the ZR/ZT 30-50 VSD⁺ family with 8.6 and 10 bar(e) classes at 68 dB(A). Unlike the water-cooled 45 kW frame, where the official table lists no standard VSD row at all, the 37 kW slot keeps both speed lines documented.
Buyers therefore face a genuine two-line choice at 37 kW, and because the machine is water cooled, the heat it rejects can even be recovered as hot water up to 90°C with the Energy Recovery control unit.

ZR37VSD-8.6 on the Standard VSD Line
The printed performance window of the ZR37VSD-8.6 starts at 42.5–102.3 l/s (2.6–6.1 m³/min) across the 4 bar(e) minimum point. At the 7 bar(e) effective point the band is 41.3–101.2 l/s (2.5–6.1 m³/min), and at the 8.6 bar(e) maximum it narrows to 41.0–94.8 l/s (2.5–5.7 m³/min). Installed motor power is 37 kW, the noise level is 70 dB(A), and the standard model weighs 1372 kg. Atlas Copco lists ID / IMD integrated-dryer availability for this build, so the water-cooled circuit and the drying module can be commissioned together in one machine.
| Modelo | Point | Pressão de serviço (bar(e)) | FAD (l/s) | FAD (m³/min) | Ruído em dB(A) |
|---|---|---|---|---|---|
| ZR37VSD-8.6 | Mínimo | 4 | 42.5–102.3 | 2.6–6.1 | 70 |
| ZR37VSD-8.6 | Eficaz | 7 | 41.3–101.2 | 2.5–6.1 | 70 |
| ZR37VSD-8.6 | Máximo | 8.6 | 41.0–94.8 | 2.5–5.7 | 70 |
One detail worth noting when comparing the two 37 kW lines: the standard ZR37VSD-8.6 moves slightly more air at the bottom of its minimum-point window than the air-cooled ZT37VSD-8.6 does, 42.5 against 42.4 l/s, while its noise rating sits at 70 dB(A) rather than the air-cooled 76 dB(A). These small printed gaps give water-cooled installations a measurable reason of their own, separate from the cooling argument.
Two Pressure Classes on the Water-Cooled 37 kW Frame
The ZR 37 VSD⁺ carries the same permanent-magnet IE5 drive philosophy as the rest of the ZR/ZT 30-50 VSD⁺ family, with an installed motor rating of 37 kW (50 hp) and a noise level of 68 dB(A). Its imperial pressure table runs 58, 102 and 125 psig across the minimum, effective and maximum points of the 8.6 bar(e) class, and 58, 130 and 145 psig on the 10 bar(e) class. Dryer integration follows the Full Feature structure of the family, documented through the Full Feature (iMD) and Full Feature (iD) pack weights.

8.6 bar(e) Tier on the ZR 37 VSD⁺
In the 8.6 bar(e) class the ZR37VSD+-8.6 delivers 37.8–106.6 l/s (2.2–6.4 m³/min) at the 4 bar(e) minimum, 37.1–105.1 l/s (2.2–6.3 m³/min) at the 7 bar(e) effective point, and 37.02–98.04 l/s (2.2–5.8 m³/min) at the 8.6 bar(e) maximum. The cfm windows printed beside these figures are 80.09–225.9, 78.7–222.7 and 78.4–207.7. Compared with the standard ZR37VSD-8.6, the VSD⁺ trades a little low-point flow for a lower 68 dB(A) rating and the 10 bar(e) upgrade path.
| Modelo | Point | Pressão de serviço (bar(e)) | FAD (l/s) | FAD (m³/min) | Ruído em dB(A) |
|---|---|---|---|---|---|
| ZR37VSD+-8.6 | Mínimo | 4 | 37.8–106.6 | 2.2–6.4 | 68 |
| ZR37VSD+-8.6 | Eficaz | 7 | 37.1–105.1 | 2.2–6.3 | 68 |
| ZR37VSD+-8.6 | Máximo | 8.6 | 37.02–98.04 | 2.2–5.8 | 68 |

10 bar(e) Tier on the ZR 37 VSD⁺
The 10 bar(e) class of the ZR 37 VSD⁺ keeps the minimum-point window at 37.8–106.6 l/s (2.2–6.40 m³/min) and then steps down to 36.2–94.01 l/s (2.17–5.6 m³/min) at the 9 bar(e) effective point and 36.03–83.5 l/s (2.1–5.01 m³/min) at the 10 bar(e) maximum. Printed cfm values run 80.09–225.9, 76.7–199.2 and 76.3–176.9 across the three points. For water-cooled plants that also want compression heat recovery, this class pairs directly with the Energy Recovery control unit, so the same machine that holds 145 psig at full load can feed 90°C hot water back to the process.
| Modelo | Point | Pressão de serviço (bar(e)) | FAD (l/s) | FAD (m³/min) | Ruído em dB(A) |
|---|---|---|---|---|---|
| ZR37VSD+-10 | Mínimo | 4 | 37.8–106.6 | 2.2–6.40 | 68 |
| ZR37VSD+-10 | Eficaz | 9 | 36.2–94.01 | 2.17–5.6 | 68 |
| ZR37VSD+-10 | Máximo | 10 | 36.03–83.5 | 2.1–5.01 | 68 |
Energy Recovery Turns Rejected Heat into 90°C Hot Water
Atlas Copco documents the Energy Recovery control unit for the ZR/ZT 30-50 VSD⁺ family with hot water temperatures up to 90°C, and on the water-cooled ZR 37 VSD it becomes a practical plant utility rather than a brochure line. Compression heat that would otherwise go into cooling water is diverted into a recovery circuit, and the resulting hot water can wash down equipment, feed cleaning-in-place loops or preheat boilers.
For a pharmaceutical or food plant already running hot-water sanitizing cycles, recovering heat from a 37 kW oil-free compressor that runs most of the year shortens the payback conversation considerably. The unit is ordered as an option alongside the standard cooling arrangement, and it operates without disturbing the printed FAD figures of the chosen pressure class.

Pack Weights and Footprints of the ZR 37 VSD
The ZR37VSD-8.6 standard build weighs 1372 kg and shares the ZR 37-55 VSD water-cooled dimension group at 2440 × 1016 × 1880 mm. The ZR 37 VSD⁺ uses the family pack weight of 1350 kg, documented together with the 30 kW frame in the ZR/ZT 30-50 VSD⁺ weight table, and grows to 1610 kg as Full Feature (iMD) or 1504 kg as Full Feature (iD). Its footprint is the 2005 × 1022 × 1909 mm family envelope, extended to 2440 × 1022 × 1909 mm in Full Feature form.
| Item | Valor |
|---|---|
| ZR37VSD-8.6 standard model weight | 1372 kg |
| ZR/ZT 37 VSD⁺ pack weight | 1350 kg |
| ZR/ZT 37 VSD⁺ Full Feature (iMD) | 1610 kg |
| ZR/ZT 37 VSD⁺ Full Feature (iD) | 1504 kg |
| ZR 37-55 VSD dimension group (L × W × H) | 2440 × 1016 × 1880 mm |
| ZR/ZT 30-50 VSD⁺ footprint (L × W × H) | 2005 × 1022 × 1909 mm |
| ZR/ZT 30-50 VSD⁺ (FF) footprint (L × W × H) | 2440 × 1022 × 1909 mm |
Where Each ZR 37 VSD Line Fits the Plant
Where the process lives at 7 bar(e) most of the year, the standard ZR37VSD-8.6 with its 41.3–101.2 l/s effective window and ID / IMD dryer availability is the direct fit, and its 1372 kg pack installs in the same space envelope as the larger water-cooled VSD frames. Where the plant runs mixed pressures, holds quiet-area requirements near 68 dB(A), or wants the 90°C Energy Recovery option, the ZR 37 VSD⁺ classes carry the case with their 37.8–106.6 l/s minimum-point flow. Electronics and laboratory users often weigh the 10 bar(e) class against redundancy instead, since 36.03–83.5 l/s at the 10 bar(e) maximum still covers a surprising share of instrument-air demand at 37 kW.
Perguntas mais frequentes
Does the ZR 37 VSD really have a standard VSD build, or only the VSD⁺? The 2026 technical specification table lists the ZR37VSD-8.6 explicitly, with 42.5–102.3 l/s at the 4 bar(e) minimum, 70 dB(A), 1372 kg and ID / IMD dryer availability. The VSD⁺ line then adds the ZR37VSD+-8.6 and ZR37VSD+-10 classes at 68 dB(A), so both speed lines are officially documented at 37 kW for water-cooled buyers.
How hot can the recovered water get on the ZR 37 VSD? The Energy Recovery control unit of the ZR/ZT 30-50 VSD⁺ family reaches hot water temperatures up to 90°C. On the water-cooled ZR 37 VSD this converts compression heat into process hot water while the compressor continues to hold its printed flow windows, such as 37.1–105.1 l/s at the 7 bar(e) effective point of the ZR37VSD+-8.6.
| Peso | 1350 kg |
|---|---|
| Dimensões | 200.5 × 102.2 × 190.9 cm |
| Pressão máxima de funcionamento em bar(e) | 10 |
| Pressão máxima de funcionamento em psig | 145 |
| Motor instalado | 37 kW |
| Potência do motor instalada | 50 hp |
| Capacidade FAD l/s | 36.03 – 106.6 |
| Capacidade FAD m³/min | 2.1 – 6.4 |
| Nível de ruído | 68 dB(A) |
| Dimensões (C × L × A) | 2005 × 1022 × 1909 mm |
| País de origem | CN |
| Código SH | 8414804990 |
| Prazo de execução | 2-4 semanas |
| MOQ | 1 unidade |
| Embalagem | Caixa de madeira |
| Qualidade do produto | 100% Genuíno, 100% Original, Novo |
| Modo de transação | CFR, CIF, CIP, CPT, DAP, DDP, EXW, FCA |

































Tomasz R -
Our plant chose the Atlas Copco ZR 37 VSD mainly because the water-cooled design keeps the compressor hall cool in summer, and it has performed exactly as expected. The ZR37VSD-8.6 gives us 41.3–101.2 l/s at the 7 bar(e) effective point, which covers our filling lines with room to spare, and the 70 dB(A) rating means conversation nearby is no problem. With the IMD integrated dryer the dew point has stayed consistent through humid months. We also like that the 1372 kg unit fits our limited floor space without any ventilation rework.