3002600350: ATLAS COPCO MOTOR NON DRIVE SIDE KIT

(1 customer review)

$680.00

The Atlas Copco 3002600350 motor non-drive-side kit is the bearing-and-seal set listed for oil-injected screw compressors in the GA 55, GA 75 and GA 90 parts catalogues. It contains one ball bearing, one external circlip, one DIN471-75X2.5 circlip and one seal lip, supplied as a 1.3 kg set measuring 205 x 205 x 125 mm. Send us the number from your old kit plus your compressor model and serial number, and our parts desk will confirm the match before we quote.

Enquiry
SKU: 202 Category: Tag: Brand:
Part Name
MOTOR NON DRIVE SIDE KIT FOR OIL INJECTED SCREW COMPRESSORS
Part Number
3002600350
Kit Contents
BALL BEARING x1; EXT.CIRCLIP x1; CIRCLIP-DIN471-75X2.5 x1; SEAL LIP x1
Price
680.00 EUR
Origin
BE
Tariff Code
8414909090
Dimensions
205 x 205 x 125 mm
Weight
1.3 kg
Side
Non-drive end of the motor
Application
GA 55, GA 75, GA 55+, GA 75+, GA 90 fixed speed; GA 55 VSD, GA 75 VSD, GA 90 VSD
Guaranteed Safe Checkout

The Atlas Copco 3002600350 is the motor non-drive-side kit for oil-injected screw compressors. It is a small repair set rather than a complete motor: the 3002600350 restores the bearing support and the sealing at the end of the motor opposite the drive coupling. The kit appears in the motor repair sections of the fixed-speed GA 55 / GA 75 catalogue and the GA 55+ / GA 75+ / GA 90 catalogue, and it is also listed for the GA 55 VSD, GA 75 VSD and GA 90 VSD machines. One number covers all of them. The recorded set weighs 1.3 kg and measures 205 x 205 x 125 mm.

What Arrives Inside the 3002600350 Non-Drive-Side Kit

The 3002600350 is defined by its four-line bill of materials, and each piece has a distinct job at the non-drive end. The ball bearing, quantity one, carries the rotor weight and locates the shaft at the end away from the coupling. The external circlip, quantity one, seats in the shaft groove and holds the bearing inner race against axial movement. The second retaining ring is listed specifically as CIRCLIP-DIN471-75X2.5, quantity one, a 75 mm shaft ring with a 2.5 mm section that differs from the external circlip and is not interchangeable with it. The seal lip, quantity one, closes the housing against grease loss and contamination at the same end.

Because the kit mixes two different circlips, an outer clip and a DIN471-75X2.5 internal ring, the 3002600350 is not a generic bearing pack. Buyers replacing a single ring from a mixed box can end up with the wrong clip seated in the wrong groove. The set is recorded at 1.3 kg on a 205 x 205 x 125 mm envelope, a flat, square footprint that reflects the small parts count rather than a full motor assembly.

Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (1)
Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (1)

One Non-Drive-Side Number Across Two Rebearing Families

The most useful fact about 3002600350 is what does not change. In the GA 55 and GA 75 fixed-speed group, the motor repair set is 3002600330, the drive-side kit is 3002600340, the non-drive-side kit is 3002600350, and the fan kit is 1092026400. In the GA 55+, GA 75+ and GA 90 group, the rebearing kit changes to 3002600360 and the drive-side kit changes to 3002600370, yet the non-drive-side kit stays 3002600350 and the fan kit stays 1092026400. The bearing and drive ends split into two part-number families; the non-drive end does not.

The VSD catalogue repeats the same pattern. For the GA 55 VSD machine the listed set is 3002600330 with drive side 3002600340 and non-drive side 3002600350. For the GA 75 VSD and GA 90 VSD machines the rebearing kit is 3002600360 with drive side 3002600370, and the non-drive side is once again 3002600350. Whether the motor belongs to the older fixed-speed range or the VSD range, the part you need at the non-drive end carries the same number. A working example of the platform this kit serves is the Atlas Copco GA 90 (FF 90⁺) oil-injected air compressor.

This is why identifying the end of the motor matters more than identifying the machine when you order 3002600350. The same kit can serve a GA 55, a GA 75+, a GA 55 VSD or a GA 90 VSD, provided the work is at the non-drive side. The catalogue groups the other three kits by motor family, but it deliberately leaves the non-drive-side kit shared.

Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (2)
Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (2)

Specification Summary

Item Record
Part Name MOTOR NON DRIVE SIDE KIT FOR OIL INJECTED SCREW COMPRESSORS
Part Number 3002600350
Kit Contents BALL BEARING x1; EXT.CIRCLIP x1; CIRCLIP-DIN471-75X2.5 x1; SEAL LIP x1
Price 680.00 EUR
Origin BE
Tariff Code 8414909090
Dimensions (L x W x H) 205 x 205 x 125 mm
Weight 1.3 kg
Side Non-drive end of the motor
Application GA 55, GA 75, GA 55+, GA 75+, GA 90 fixed speed; GA 55 VSD, GA 75 VSD, GA 90 VSD
Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (3)
Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (3)

Non-Drive Side or Drive Side: Choosing the Correct Kit

The four kit numbers in each motor family sit next to each other in the catalogue, which is exactly how the wrong one gets ordered. The rebearing kit, 3002600330 or 3002600360, is the broad set for a full re-bearing of the motor. The drive-side kit, 3002600340 or 3002600370, serves the coupling end where the load is transmitted. The 3002600350 is confined to the opposite, non-drive end. The fan kit 1092026400 is a separate item again and is shared across both families just like the 3002600350.

Confirm the end of the motor before you confirm the machine model. A noisy non-drive end with a worn bearing and a weeping seal points to 3002600350, while play at the coupling end points to a drive-side kit. If both ends need attention, the catalogue lists the rebearing kit as the combined option rather than two separate orders. Reading the old part off the removed ring or bearing, together with the machine serial number, removes the guesswork between four similar kit numbers.

Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (4)
Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (4)

Fitting Checks on the Non-Drive End

Start by comparing the removed parts against the four lines in the 3002600350: one ball bearing, the external circlip, the DIN471-75X2.5 ring and the seal lip. The DIN471 ring is sized to a 75 mm shaft with a 2.5 mm section, so measure the groove in the old shaft before assuming a clip from another kit will seat correctly. Clean the bearing housing and the shaft groove, then check that the new circlip sits fully in its groove and that the seal lip faces the direction the old seal faced.

Press on the bearing inner race rather than the outer race, and stop as soon as the bearing seats against its shoulder, so the seal lip is not damaged during fitting. After assembly, turn the shaft by hand to confirm it runs free before the motor is re-coupled. The 3002600350 covers the non-drive side only, so a bearing that failed from coupling misalignment should be investigated at the drive end as well; otherwise the new parts may not last.

Frequently Asked Questions

Is 3002600350 the same part on a GA 55, a GA 75+ and a GA 90 VSD? Yes. The catalogues list 3002600350 as the non-drive-side kit for the GA 55 and GA 75 fixed-speed group, the GA 55+, GA 75+ and GA 90 group, and the GA 55 VSD, GA 75 VSD and GA 90 VSD machines. The rebearing and drive-side numbers change between groups; the non-drive-side number does not.

What exactly is inside the 3002600350 kit? Four pieces, one of each: a ball bearing, an external circlip, a circlip listed as DIN471-75X2.5, and a seal lip. The two circlips are different parts and are not substitutes for each other.

Which number do I need for the drive end instead? The drive-side kit is 3002600340 in the GA 55 / GA 75 group and 3002600370 in the GA 55+ / GA 75+ / GA 90 group. For both ends together the catalogues list the rebearing kits 3002600330 and 3002600360. None of these replaces 3002600350, which is only the non-drive-side kit.

Does the fan kit belong to the 3002600350? No. The motor fan kit is listed separately as 1092026400. It appears alongside 3002600350 in both the fixed-speed and VSD repair lists, but it is an independent part number.

What do the dimensions and weight refer to? The recorded 3002600350 set measures 205 x 205 x 125 mm and weighs 1.3 kg. Those figures describe the supplied kit, not the motor it fits.

Confirming the Match Before You Order

Pass on the number stamped on the removed bearing or ring, and add your compressor model and serial number. Our parts desk will check the 3002600350 against the motor end on your machine and issue a quotation once the match is confirmed, so you receive the correct circlips and seal lip for the job.

More Kits List

Part Number Part Name Part-Number
1837008940 BEARING KITS 1837-0089-40
1837008941 BEARING KITS 1837-0089-41
1837008942 BEARING KITS 1837-0089-42
2901311610 BEARING KITC90 A 180L(KBSYNTH) 2901-3116-10
2901311810 BEARING KITC90 A 200L(KBSYNTH) 2901-3118-10
1629380126 CUBICLE FANKIT VSD IEC/UL 1629-3801-26
2901364032 KIT7.5-10HP C43I 6000H/3YR VSD 2901-3640-32
2906056900 GEARBOX OVERHAULKIT 2906-0569-00
3002601590 kits 8000h GA45-75 VSD PM 3002-6015-90
3002604760 24000H KIT_ ZS90-160(VSD) 3002-6047-60
3002604770 40000H KIT_ ZS90-160(VSD) 3002-6047-70
3002617516 GEARBOX KIT_G 315-355 3002-6175-16
2903005400 TOOLKIT FOR FAN REBEARING 2903-0054-00
2903005500 TOOLKIT FOR FAN REBEARING 2903-0055-00
2903005600 TOOLKIT FOR FAN REBEARING 2903-0056-00
1092000231 MOTOR SERVICE KIT FOR GX7-11 1092-0002-31
1092000232 MOTOR SERVICE KIT FOR GA11-22 1092-0002-32
1092000233 MOTOR SERVICE KIT FOR GA30C 1092-0002-33
1092000234 MOTOR SERVICE KIT FOR GA30C 23 1092-0002-34
1092000237 MOTOR SERVICE KIT FOR GA5-7 1092-0002-37
1092000238 MOTOR SERVICE KIT SCD75K 1092-0002-38
1092001243 MOTOR SERVICE KIT GA15-22 1092-0012-43
1092005058 MOTOR SERVICE KIT GAE26-30 1092-0050-58
1092005090 MOTOR OVERHAUL KIT GAE11-22 1092-0050-90
1092005092 MOTOR OVERHAUL KIT GA26-30 1092-0050-92
1092204001 GA75VSD+ MOTOR KIT 1092-2040-01
1092204002 GA90VSD+ MOTOR KIT 1092-2040-02
1092204003 GA110VSD+ MOTOR KIT 1092-2040-03
1092908211 MOTOR KIT-LFB15 &50HZ 1092-9082-11
1092908326 MOTOR AND MOTOR ASSEMBLING KIT 1092-9083-26
1092908354 MOTOR AND MOTOR ASSEMBLING KIT 1092-9083-54
1092908356 MOTOR AND MOTOR ASSEMBLING KIT 1092-9083-56
1129705364 F3002/230 AL MOTOR KIT-2FAN 1129-7053-64
1129705555 MOTOR/PULLEY KIT 2.5HP 1129-7055-55
1129705562 MOTOR/PULLEY KIT 3HP 1129-7055-62
1129705566 MOTOR/PULLEY KIT 5.5HP 1129-7055-66
1129705572 MOTOR/PULLEY KIT 7.5HP 1129-7055-72
1129705577 MOTOR/PULLEY KIT 10HP 1129-7055-77
1129705582 MOTOR/PULLEY KIT 15HP 1129-7055-82
1129705600 BEARING KIT PF3 1129-7056-00
1129705622 BEARING KIT PF7 1129-7056-22
1129705678 BEARING KIT PS10 1129-7056-78
1129705876 BEARING KIT PS15 1129-7058-76
1129706045 BEARING KIT PS7 1129-7060-45
1129706314 BEARING KIT MS25 1129-7063-14
1129706373 BEARING KIT 1129-7063-73
1129706610 MOTOR/PULLEY KIT 1.5HP 1129-7066-10
1129706619 BEARING KIT PF1 1129-7066-19
1129706669 3HP MOTOR KIT+D120 PULLEY 1129-7066-69
1129706704 MOTOR/PULLEY KIT 2.5HP 1129-7067-04
Weight 1.3 kg
Dimensions 20.5 × 20.5 × 12.5 cm
Part Name

MOTOR NON DRIVE SIDE KIT FOR OIL INJECTED SCREW COMPRESSORS

Part Number

3002600350

Kit Contents

BALL BEARING x1; EXT.CIRCLIP x1; CIRCLIP-DIN471-75X2.5 x1; SEAL LIP x1

Price

680.00 EUR

Origin

BE

Tariff Code

8414909090

Dimensions

205 x 205 x 125 mm

Weight

1.3 kg

Side

Non-drive end of the motor

Application

GA 55, GA 75, GA 55+, GA 75+, GA 90 fixed speed; GA 55 VSD, GA 75 VSD, GA 90 VSD

1 review for 3002600350: ATLAS COPCO MOTOR NON DRIVE SIDE KIT

  1. 5
    (1 customer review)
    100% of customers recommend this product.
    5 Stars100%4 Stars0%3 Stars0%2 Stars0%1 Star0%
  2. Avatar of Jaroslav H

    Jaroslav H –

    Our GA 55 motor started rumbling at the non-drive end, and the catalogue pointed to kit 3002600350. The carton arrived with a 1.3 kg set in a 205 x 205 x 125 mm box, and all four pieces were there: the ball bearing, two different circlips including the DIN471-75X2.5, and the seal lip. Our technician checked the circlip groove and the seal direction before pressing the bearing home, and the motor ran quiet again. We sent the serial number first and had the fitment confirmed before ordering.

    0 of 0 found this review helpful
Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Atlas Copco MOTOR NON DRIVE SIDE KIT 3002600350 (1)
3002600350: ATLAS COPCO MOTOR NON DRIVE SIDE KIT

$680.00

Enquiry