1635027007: ATLAS COPCO AIR COMPRESSOR MOTOR

Sichuan Sykes Mechanical And Electrical Technology Co., Ltd., as an Atlas Copco distributor in China, supplies the brand-new and genuine original Atlas Copco 1635027007 Motor — a heavy-duty electric drive motor engineered specifically for Atlas Copco air compressor systems.

Product Introduction

Atlas Copco designs and produces 1635027007 motor under strict global quality standards to ensure stable performance in demanding industrial environments. Manufactured in Finland, this motor reflects the precision engineering and reliability that Atlas Copco has built its global reputation on. It delivers stable, continuous power output to drive the compression element of your air compressor system, supporting uninterrupted operation across a wide range of demanding industrial workloads. This unit supports heavy-duty air compressor systems and delivers stable power output. It works efficiently under continuous load conditions and reduces unexpected downtime.

This product is sourced directly from Atlas Copco (Shanghai) Trading Co., Ltd., guaranteeing that every unit is 100% factory-fresh, fully authentic, and manufactured under Atlas Copco’s rigorous global quality standards. The part number 1635027007 appears on the motor nameplate and serves as the official identification used for both product reference and procurement. Customers can verify authenticity through official identification markings and distributor documentation provided by Sichuan Sykes Mechanical And Electrical Technology Co., Ltd.

Product Parameters

Product Advantages

Genuine Finnish Manufacturing and Factory-Grade Quality

The 1635027007 Motor originates from Finland, where Atlas Copco applies European precision engineering standards at every stage of production. The design ensures 100% compatibility with specified compressor systems. You install it directly without structural modification. Every unit leaves the factory with full traceability documentation, giving you complete confidence in authenticity and specification accuracy.

Extended Service Life Through Superior Materials

Atlas Copco uses high-grade insulation materials and precision-balanced rotors. These features reduce vibration and wear. As a result, the motor can extend service life by approximately 30% under standard maintenance conditions. The precision-balanced rotor also contributes to quieter operation and reduces mechanical stress on surrounding compressor components over the motor’s full service life.

Lower Maintenance Costs and Reduced Downtime

Original design accuracy minimizes unexpected failures. This helps reduce maintenance frequency by around 15%, saving both downtime and service expenses. When you install a genuine Atlas Copco motor, you eliminate the compatibility uncertainties and premature failure risks associated with non-genuine alternatives, protecting your production schedule and maintenance budget simultaneously.

Immediate Performance Restoration

Because this motor carries exact factory dimensions, winding specifications, and electrical characteristics, your compressor system returns to its original performance rating immediately upon installation. No adjustments, modifications, or recalibration steps are required. The motor integrates seamlessly into your existing Atlas Copco compressor without any structural changes.

Reliable Supply and Fast Delivery

Sichuan Sykes Mechanical And Electrical Technology Co., Ltd. supplies this motor with professional export packing and fast international logistics support, helping customers shorten delivery cycles by nearly 25% through optimized inventory management. Every shipment includes original Atlas Copco packaging and complete product identification, ensuring the motor arrives safely and ready for immediate installation.

Full Warranty Coverage and After-Sales Support

Each Atlas Copco 1635027007 Motor supplied by Sichuan Sykes Mechanical And Electrical Technology Co., Ltd. comes with a 12-month warranty covering defects in design or production. Our technical team provides professional guidance before, during, and after installation, ensuring you have the support you need throughout the entire product lifecycle.

Precautions and Operating Steps

Important Precautions Before Replacement

1. Confirm that part number 1635027007 matches your specific Atlas Copco compressor model and serial number before proceeding. Contact Sichuan Sykes Mechanical And Electrical Technology Co., Ltd. to verify compatibility if you have any doubt.
2. Only qualified electricians and trained mechanical technicians should perform motor replacement on industrial compressor systems. Improper installation voids the warranty and creates serious safety risks.
3. Fully de-energize the compressor before beginning any work. Engage lockout/tagout procedures and confirm zero voltage at all terminals using a calibrated meter. Never work on an energized system.
4. Allow the motor and surrounding components to cool completely before disassembly. Operating temperatures on industrial motors can cause severe burns if contact occurs during or immediately after shutdown.
5. Use only genuine Atlas Copco parts, approved tools, and specified lubricants throughout the procedure. Non-genuine components may compromise performance and cancel warranty coverage.
6. Prepare a clean, dry, and well-lit workspace. Protect open electrical terminals and mechanical interfaces from dust, moisture, and contamination throughout the replacement process.
   Before removing the old motor, photograph and label all electrical connections, cable routing paths, and mounting orientations to serve as reference during reinstallation.

Step-by-Step Motor Replacement Procedure

1. Step 1: Shut Down and Isolate the System. Power off the compressor completely. Engage the lockout/tagout procedure on the main electrical supply and all control circuits. Allow the system to reach full rest, and confirm zero pressure and zero voltage before proceeding.
2. Step 2: Disconnect Electrical Connections. Open the motor terminal box. Photograph the wiring configuration before disconnecting any cables. Label each cable clearly and disconnect all power supply leads, control wires, and earthing connections. Cap all open terminals to prevent contamination.
3. Step 3: Remove the Drive Coupling or Belt. Disconnect the drive coupling, flexible coupling, or drive belt connecting the motor shaft to the air end or gearbox. Follow the torque specifications in your compressor’s service manual for coupling removal. Set all fasteners aside in a labeled container.
4. Step 4: Unbolt the Motor from the Mounting Frame. Remove all mounting bolts securing the motor to the baseplate or motor slide rail. Use appropriate lifting equipment rated for a minimum of 720 kg. Attach a certified lifting sling to the motor’s designated lift points only — never lift from cable entry points or shaft ends.
5. Step 5: Extract the Old Motor. Using rated overhead lifting equipment, carefully extract the old motor along the slide rail or directly from the mounting frame. Move it safely to a designated staging area. Inspect the motor mounting surface and slide rail for corrosion, wear, or misalignment before proceeding.
6. Step 6: Clean and Inspect the Mounting Area. Thoroughly clean the mounting surface, slide rail, and all mating faces. Check for any structural damage, misalignment, or worn threads. Correct any issues identified before installing the new motor.
7. Step 7: Position and Mount the New 1635027007 Motor. Using rated lifting equipment attached to the correct lift points, lower the new motor carefully onto the mounting frame or slide rail. Align the motor shaft axis precisely with the air end or drive train before tightening any bolts. Hand-tighten all mounting bolts first, verify alignment, and then apply final torque values per the Atlas Copco service manual specifications.
8. Step 8: Install the Drive Coupling. Reinstall the drive coupling, flexible coupling element, or drive belt. Verify correct alignment between motor shaft and driven shaft using a dial indicator or laser alignment tool. Misalignment is a primary cause of premature bearing failure and must be corrected before commissioning.
9. Step 9: Reconnect All Electrical Connections. Reconnect all power supply leads, control wires, and earth connections according to your reference photographs and wiring labels. Verify correct phase sequence, cable routing, and torque on all terminal screws. Close and secure the motor terminal box.
10. Step 10: Commissioning and Test Run. Before full-load startup, perform a no-load test run to verify correct rotation direction and check for unusual vibration, noise, or abnormal heat buildup. Monitor motor current, voltage, and bearing temperature during the first 30 minutes of operation. Confirm all readings fall within Atlas Copco’s specified limits before returning the compressor to full production service.

FAQs

Q1: Is the Atlas Copco 1635027007 Motor a brand-new genuine product?
A1: Yes. Sichuan Sykes Mechanical And Electrical Technology Co., Ltd. supplies this motor as a brand-new genuine original unit sourced directly from Atlas Copco (Shanghai) Trading Co., Ltd. Every unit arrives in original Atlas Copco packaging with full product identification and traceability documentation.

Q2: Which Atlas Copco compressor models is this motor compatible with?
A2: This motor is designed for specific Atlas Copco air compressor models. Compatibility depends on your compressor’s model designation and serial number. Please provide your compressor’s serial number when contacting Sichuan Sykes Mechanical And Electrical Technology Co., Ltd., and our team will confirm the correct fit before you place your order.

Q3: Where is the 1635027007 Motor manufactured?
A3: This motor is manufactured in Finland under Atlas Copco’s strict European quality control standards. It is then supplied to customers worldwide through Atlas Copco (Shanghai) Trading Co., Ltd. and authorized distributors such as Sichuan Sykes Mechanical And Electrical Technology Co., Ltd.

Q4: What does the 12-month warranty cover, and what conditions void it?
A4: The 12-month warranty covers defects arising from design or production. It does not cover damage caused by misuse, improper installation, normal wear and tear, or the use of non-genuine Atlas Copco spare parts. Any of these conditions will result in cancellation of warranty coverage.

Q5: Does Sichuan Sykes Mechanical And Electrical Technology Co., Ltd. provide technical support for motor replacement?
A5: Yes. Our professional technical team provides comprehensive support throughout the entire process — from compatibility confirmation and pre-installation guidance to step-by-step installation assistance and post-installation follow-up. If you encounter any issues at any stage, our team responds promptly to help you resolve them efficiently.

More Motors List

If you need other Atlas Copco air compressor motors, we provide more models in the table below or you can submit your requirements to us directly.