Atlas Copco ZT 22 VSD (FF VSD⁺) Oil-free Tooth Air Compressor

(1 customer review)

$15,000.00

The Atlas Copco ZT 22 VSD is the 22 kW air-cooled oil-free tooth compressor whose variable-speed build is printed at a single 10 bar(e) class, while its fixed-speed siblings span 7.5, 8.6 and 10 bar(e). Tell us your working pressure and whether the dryer belongs inside the canopy, and we will confirm the right build before preparing the Atlas Copco ZT 22 VSD quotation.

Enquiry
Maximum working pressure bar(e)
10
Maximum working pressure psig
145
Installed motor
22 kW
Installed motor power
30 hp
Capacity FAD l/s
22.2 - 60.1
Capacity FAD m³/min
1.3 - 3.6
Noise level
69 dB(A)
Dimensions (L × W × H)
2195 × 1026 × 1621 mm
Country of Origin
CN
HS Code
8414804990
Lead Time
2-4 Weeks
MOQ
1 Unit
Packaging
Wooden Crate
Product Quality
100% Genuine, 100% Original, Brand New
Transaction Mode
CFR, CIF, CIP, CPT, DAP, DDP, EXW, FCA
Guaranteed Safe Checkout

A Single Variable-Speed Class Against Three Fixed-Speed Ones

The Atlas Copco ZT 22 VSD is an unusual entry in the oil-free tooth range because the two halves of its specification do not mirror each other. On the fixed-speed side the 22 kW air-cooled frame is printed at three discharge pressures — 7.5, 8.6 and 10 bar(e) — each with its own free air delivery. On the variable-speed side the official table carries only one machine, the ZT22VSD-10, and that single row covers the whole 4 to 10 bar(e) working range. There is no separate 8.6 bar(e) variable-speed print at this size, and the ZR/ZT 30-50 VSD⁺ booklet begins at 30 kW, so the 22 kW stepping never offers the permanent-magnet VSD⁺ build that its larger siblings do.

That arrangement makes the model a study in how one pressure class can be stretched. The ZT22VSD-10 is rated at 22 kW and 69 dB(A), and its row lists both ID and IMD as integrated dryer options. The fixed-speed ZT 22 – 7.5, ZT 22 – 8.6 and ZT 22 – 10 share the same 22 kW motor and the same 69 dB(A) noise figure, changing only their delivered flow as pressure climbs. A buyer comparing the two lines is therefore not choosing between different motors or different noise envelopes; the choice is between a machine that holds one nominal pressure and a machine that varies its speed to follow demand across the full band.

Atlas Copco ZT 22 VSD (1)Atlas Copco ZT 22 VSD (1)

The ZT22VSD-10 Flow Map

The variable-speed row is published at three working points rather than one. At the minimum pressure of 4 bar(e) the ZT22VSD-10 delivers between 24.9 and 60.1 l/s, or 1.5 to 3.6 m³/min. At the effective point of 7 bar(e) the band narrows slightly to 23.6 – 58.8 l/s and 1.4 – 3.5 m³/min. At the maximum of 10 bar(e) it settles at 22.2 – 48.8 l/s and 1.3 – 2.9 m³/min. The upper end of each band is the flow the machine reaches at full speed for that pressure, while the lower end is where the drive is still able to hold the setpoint before it drops out of regulation.

Working point Pressure bar(e) FAD l/s FAD m³/min
Minimum 4 24.9 – 60.1 1.5 – 3.6
Effective 7 23.6 – 58.8 1.4 – 3.5
Maximum 10 22.2 – 48.8 1.3 – 2.9

Read across the row, the numbers describe a machine that trades peak volume for pressure headroom in a predictable way. At 7 bar(e) the ZT22VSD-10 still reaches 58.8 l/s at its top end, only marginally below the 60.1 l/s it can show at 4 bar(e). By 10 bar(e) that top end has fallen to 48.8 l/s, a reduction that reflects the extra work of compressing to the class ceiling rather than any change in the drive. Plants that run most of their hours near 7 bar(e) therefore keep almost the whole flow capability of the low-pressure setting while retaining the ability to push to 10 bar(e) when a utility loop calls for it.

Atlas Copco ZT 22 VSD (2)Atlas Copco ZT 22 VSD (2)

Fixed-Speed Delivery at 50 Hz

Because the variable-speed build prints only one pressure, the three fixed-speed rows are the clearest way to see what the same 22 kW element does when it is locked to a single duty. At 50 Hz the ZT 22 – 7.5 delivers 61.1 l/s, or 3.7 m³/min and 129.5 cfm at 7.5 bar(e). Raising the class to 8.6 bar(e) on the ZT 22 – 8.6 brings 55.4 l/s, 3.3 m³/min and 114.4 cfm. At 10 bar(e) the ZT 22 – 10 returns 49.4 l/s, 3.0 m³/min and 96.7 cfm. All three rows carry the same 22 kW and 30 hp installed motor and the same 69 dB(A) level.

Type Pressure bar(e) FAD l/s FAD m³/min FAD cfm Motor kW / hp Noise dB(A)
ZT 22 – 7.5 7.5 61.1 3.7 129.5 22 / 30 69
ZT 22 – 8.6 8.6 55.4 3.3 114.4 22 / 30 69
ZT 22 – 10 10 49.4 3.0 96.7 22 / 30 69

The spread between the top and bottom fixed-speed rows is about twelve litres per second, and it is entirely a function of pressure. A plant that picks the 7.5 bar(e) machine gains flow but gives up the ability to serve a higher-pressure consumer; one that picks the 10 bar(e) machine gets the headroom but gives up a fifth of the volume. The variable-speed build exists precisely to remove that forced choice, since its single row covers the same pressures and its 7 bar(e) effective point at 58.8 l/s sits between the two fixed-speed extremes.

Fixed-Speed Delivery at 60 Hz and the Weight Columns

For sites running on 60 Hz supply the same three fixed-pressure builds are printed again with slightly different flows. The ZT 22 – 7.5 delivers 59.4 l/s at 7.5 bar(e), the ZT 22 – 8.6 gives 54.1 l/s at 8.6 bar(e), and the ZT 22 – 10 returns 46.0 l/s at 10 bar(e), each in cfm at 126.0, 114.7 and 97.4 respectively. Motor rating and noise stay at 22 kW, 30 hp and 69 dB(A) across the set. The 60 Hz rows sit a little below their 50 Hz counterparts at the same pressure, which is the usual consequence of the higher electrical frequency on this frame.

Type (60 Hz) Pressure bar(e) FAD l/s FAD cfm Motor kW / hp
ZT 22 – 7.5 7.5 59.4 126.0 22 / 30
ZT 22 – 8.6 8.6 54.1 114.7 22 / 30
ZT 22 – 10 10 46.0 97.4 22 / 30

The fixed-speed technical table also separates weight by dryer build, and that separation is useful when the variable-speed machine is being compared on installation planning. A bare ZT 22 fixed-speed unit weighs 1000 kg, the same machine with an ID dryer weighs 1215 kg, and with an iMD dryer it weighs 1285 kg. The ZT22VSD-10 is printed at 1120 kg as its standard weight; the 2026 main catalogue lists this single figure and marks ID / IMD as the available dryer options without breaking the mass out again.

An engineer planning a pad should therefore treat 1120 kg as the base and allow for the dryer mass difference shown by the fixed-speed builds rather than assuming the variable-speed figure already includes it.

Atlas Copco ZT 22 VSD (3)Atlas Copco ZT 22 VSD (3)

Weights and Dimensions of the ZT 22 Frame

The physical envelope is shared across the 15-22 kW group. A fixed-speed ZT 15-22 machine measures 1760 mm long by 1026 mm wide and 1621 mm high, the same in Full Feature form. The variable-speed ZT 22 VSD grows to 2195 mm in length while keeping the 1026 mm width and 1621 mm height. Both the workplace and Full Feature columns of the dimension table give the same values, so adding the integrated dryer does not change the footprint.

Type Length mm Width mm Height mm Full Feature length mm
ZT 15-22 (fixed speed) 1760 1026 1621 1760
ZT 22 VSD 2195 1026 1621 2195
Atlas Copco ZT 22 VSD (4)
Atlas Copco ZT 22 VSD (4)

Where the ZT 22 VSD Fits in a Plant

The single 10 bar(e) variable-speed class suits a facility whose pressure requirement is fixed but whose flow is not. A packaging plant running one header at roughly 7 bar(e) with periodic peak demand is the clearest case: the ZT22VSD-10 holds 58.8 l/s at its effective point and trims speed through the quiet hours instead of unloading a fixed-speed machine. Because the dryer can be specified as ID or IMD inside the same 2195 mm canopy, the installation does not need a separate treatment vessel, and the 69 dB(A) figure keeps the unit in line with the rest of the 15-22 kW group.

The comparison with the fixed-speed line matters at the specification stage. A plant that only ever needs 7.5 bar(e) will get more litres per second from the ZT 22 – 7.5 at 61.1 l/s than the variable-speed build can show at its 4 bar(e) minimum, and the fixed-speed machine is the simpler purchase when demand is steady. Where the load swings or where a 10 bar(e) loop must be served by the same machine, the variable-speed row becomes the better fit, because one compressor covers a band that would otherwise need two fixed-pressure units.

The absence of a VSD⁺ option at 22 kW is not a gap in practice: the permanent-magnet range starts at 30 kW, and buyers who need that drive architecture move up to that class rather than expecting it at this frame.

Reading the North American Data Sheet

North American buyers have one additional official print for this frame. The CAGI sheet for the ZT 22 STD-10, dated 30 July 2024, describes a two-stage oil-free tooth machine and records a rated capacity of 105.6 acfm at a full-load operating pressure of 145.0 psig, with the maximum full-flow operating pressure also at 145.0 psig. The Drive Motor Nominal Rating is printed as 29.5 hp at 91.7 percent efficiency and the fan motor as 0.9 hp at 70.5 percent. Total package input power is 27.5 kW at rated capacity and 7.2 kW at zero flow.

That sheet belongs to the fixed-speed 10 bar(e) build rather than the variable-speed machine, so its figures should not be mixed into the ZT22VSD-10 flow table. Its value is as a cross-check on the class: the 145.0 psig full-load pressure confirms the 10 bar(e) ceiling printed in the metric tables, and the tooth, two-stage description matches the technology across the rest of the 15-55 range. A buyer preparing a North American submittal can quote the CAGI numbers for the fixed-speed option and the metric FAD band for the variable-speed one without contradicting either source.

Questions Buyers Ask About the ZT 22 VSD

Why is there only one ZT22VSD pressure class?

The official variable-speed table prints a single machine, the ZT22VSD-10, covering 4 to 10 bar(e). The fixed-speed table at the same power carries three separate rows at 7.5, 8.6 and 10 bar(e). Atlas Copco has chosen to let one variable-speed element span the whole band rather than publish separate 8.6 and 10 bar(e) variable-speed rows at 22 kW, so the single class is a deliberate layout rather than a missing entry.

Does the ZT 22 VSD offer the VSD⁺ drive?

No. The ZR/ZT 30-50 VSD⁺ documentation begins at 30 kW, and no VSD⁺ row is printed for the 22 kW frame. The variable-speed option at this size is the conventional ZT22VSD-10. Buyers who specifically require the dual NEOS Next permanent-magnet drive move up to the 30 kW class, where the VSD⁺ build is published at both 8.6 and 10 bar(e).

How much does the integrated dryer change the machine?

The ZT22VSD-10 row lists ID and IMD as available dryer builds, and the 2026 catalogue gives a standard weight of 1120 kg without separating the dryer variants. The fixed-speed technical table shows the scale of the difference on the same frame: 1000 kg bare, 1215 kg with ID and 1285 kg with iMD. Allowing a similar increment when specifying the variable-speed machine is the safe approach for foundation planning.

From the ZT 22 VSD to the ZT 30 VSD

The ZT 22 VSD closes the small end of the oil-free tooth range, and the natural step up is the 30 kW frame. The ZT 30 VSD adds a published VSD⁺ tier alongside its variable-speed build, introducing the permanent-magnet drive that the 22 kW frame does not offer, and its flow rises to 81.1 l/s at the minimum point. A plant that has outgrown the single 10 bar(e) class of the ZT22VSD-10, or that wants the wider pressure choices of the 8.6 bar(e) VSD⁺ class, will find both in the next frame up.

Weight 1120 kg
Dimensions 219.5 × 102.6 × 162.1 cm
Maximum working pressure bar(e)

10

Maximum working pressure psig

145

Installed motor

22 kW

Installed motor power

30 hp

Capacity FAD l/s

22.2 – 60.1

Capacity FAD m³/min

1.3 – 3.6

Noise level

69 dB(A)

Dimensions (L × W × H)

2195 × 1026 × 1621 mm

Country of Origin

CN

HS Code

8414804990

Lead Time

2-4 Weeks

MOQ

1 Unit

Packaging

Wooden Crate

Product Quality

100% Genuine, 100% Original, Brand New

Transaction Mode

CFR, CIF, CIP, CPT, DAP, DDP, EXW, FCA

1 review for Atlas Copco ZT 22 VSD (FF VSD⁺) Oil-free Tooth Air Compressor

  1. 5
    (1 customer review)
    100% of customers recommend this product.
    5 Stars100%4 Stars0%3 Stars0%2 Stars0%1 Star0%
  2. Avatar of Ales K

    Ales K –

    We needed one oil-free machine to cover both a low-pressure packaging header and an occasional 10 bar(e) utility line, and the Atlas Copco ZT 22 VSD handled it without a second compressor. At the effective point it still delivers 58.8 l/s, and the whole unit sits at 69 dB(A) in the corner of our plant. Sending our pressure range was enough to get the exact configuration confirmed before order.

    0 of 0 found this review helpful
Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Atlas Copco ZT 22 VSD (1)
Atlas Copco ZT 22 VSD (FF VSD⁺) Oil-free Tooth Air Compressor

$15,000.00

Enquiry