{"id":5185,"date":"2026-11-19T14:24:31","date_gmt":"2026-11-19T06:24:31","guid":{"rendered":"https:\/\/www.ccompressor.com\/?post_type=product&p=5185"},"modified":"2026-11-19T15:39:48","modified_gmt":"2026-11-19T07:39:48","slug":"2901191021-motor-overhaul-kit","status":"publish","type":"product","link":"https:\/\/www.ccompressor.com\/pt\/product\/2901191021-motor-overhaul-kit\/","title":{"rendered":"2901191021 (=2901191011=2901191001): ATLAS COPCO MOTOR OVERHAUL KIT GA55\u207a-90"},"content":{"rendered":"
The Atlas Copco 2901191021 is a motor overhaul kit recorded for the GA55\u207a-90 oil-injected screw compressor range. It is a collection of wearing parts for a motor rebuild, not a single bearing or seal. The parts list that ships with the kit names fourteen line items, from the motor bearing and shaft-seal kit through to the small O-rings, circlip and oil nozzles. Every entry below follows the Atlas Copco part record for 2901191021, so you can compare the list with the component in your hand before you order.<\/p>\n
Because the motor is opened for this kind of work, the kit is normally bought with the machine stopped and the drive isolated. The value is in having the bearings, seals and small hardware together in one box rather than sourcing each item separately. The sections below set out what is inside, how the part number changed over time, and which details to check before the 2901191021 is confirmed against your machine.<\/p>\n The parts list for the 2901191021 records fourteen lines. One of them, the O-ring 130X2, carries a quantity of two; every other line is listed as one. The descriptions are reproduced exactly as they appear on the parts list, including the bracketed motor bearing and shaft-seal kit and the separate motor fan spares sheet.<\/p>\n The mix of items tells you what this kit is for. A spherical roller bearing and a bearing ball sit alongside seal lips, an O-ring 7.3X2.4 and a circlip. Those are the parts normally disturbed when a motor is stripped for a bearing and shaft-seal renewal. The two oil nozzles and the bushing cover the lubrication path that is opened at the same time.<\/p>\n The ERP record shows a three-step chain for this kit: 2901191001 was changed to 2901191011, and 2901191011 was changed to the current 2901191021. If your old invoice, motor label or stores system shows either of the earlier numbers, that is not a different product \u2014 it is the same kit under a superseded number.<\/p>\n This matters when you search. A buyer holding the 2901191001 drawing will not find a match by typing only that number into a current catalogue. Quoting the chain 2901191001 \u2192 2901191011 \u2192 2901191021 lets the parts desk confirm that all three point to the same overhaul content, so you receive the box that fits the motor rather than whatever a bare number search returns.<\/p>\n The name printed with the kit is MOTOR OVERHAUL KIT GA55\u207a-90 FOR OIL INJECTED SCREW COMPRESSORS, shortened on the packaging to MOTOR OVERHAUL KIT GA55\u207a-90. That range wording is the application Atlas Copco records for the kit, and it is the range to check against your machine before you place the order.<\/p>\n The part record gives the following identification and physical data for the 2901191021. These are the figures to compare with the carton label and the parts list when the kit arrives.<\/p>\n The carton measures 160 mm by 130 mm by 260 mm and the recorded weight is 3402 gr. Origin is printed as BE and the Tarrif is 84825000. These physical figures are the ones to compare against the carton label and the parts list when a 2901191021 arrives, before the kit is booked into stores.<\/p>\n One line in the parts list is a LIST OF MOTOR FAN FOR SPARES rather than a fan itself. The ERP record makes the distinction clear: for the fan, it says FOR FAN SEE 9820 6852 00. That reference is written twice in the record, which is a strong hint that the fan is ordered under its own number and is not supplied loose inside the 2901191021 box.<\/p>\n If your motor overhaul also calls for a new fan, do not assume the fan is covered by this kit. Raise 9820 6852 00 with the parts desk alongside the 2901191021 and have both checked against the serial number. That way the shutdown is not held up by a part that was assumed to be included but was listed only as a see-reference.<\/p>\n A motor bearing and shaft-seal renewal deals with two things at once. The bearings carry the rotor and keep the air gap even; the shaft seal keeps lubricant where it belongs and keeps compressor-side contamination out of the drive end. Over a long service life both wear, and the small parts around them \u2014 the seal lips, the O-ring 130X2, the circlip \u2014 are disturbed every time the motor is opened.<\/p>\n
Inside the 2901191021 Motor Overhaul Kit<\/h2>\n
\n\n
\n \nDescri\u00e7\u00e3o<\/th>\n Quantidade<\/th>\n<\/tr>\n<\/thead>\n \n (MOTORBEARING – SHAFTSEAL KIT)<\/td>\n 1<\/td>\n<\/tr>\n \n DRAIN NIPPLE<\/td>\n 1<\/td>\n<\/tr>\n \n BORDA DE VEDA\u00c7\u00c3O<\/td>\n 1<\/td>\n<\/tr>\n \n O-RING<\/td>\n 1<\/td>\n<\/tr>\n \n BEARING BALL<\/td>\n 1<\/td>\n<\/tr>\n \n O-RING 130X2<\/td>\n 2<\/td>\n<\/tr>\n \n BORDA DE VEDA\u00c7\u00c3O<\/td>\n 1<\/td>\n<\/tr>\n \n OIL NOZZLE<\/td>\n 1<\/td>\n<\/tr>\n \n BUCHA<\/td>\n 1<\/td>\n<\/tr>\n \n OIL NOZZLE C106-C111 ELEMENT<\/td>\n 1<\/td>\n<\/tr>\n \n BEARING ROLLER SPHERICAL<\/td>\n 1<\/td>\n<\/tr>\n \n O-RING 7.3X2.4<\/td>\n 1<\/td>\n<\/tr>\n \n CIRCLIP<\/td>\n 1<\/td>\n<\/tr>\n \n LIST OF MOTOR FAN FOR SPARES<\/td>\n 1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n The 2901191001 to 2901191021 Part-Number Chain<\/h2>\n

Physical Identification and Origin Details<\/h2>\n
\n\n
\n \nItem<\/th>\n Recorded value<\/th>\n<\/tr>\n<\/thead>\n \n N\u00famero da pe\u00e7a<\/td>\n 2901191021<\/td>\n<\/tr>\n \n Nome da pe\u00e7a<\/td>\n MOTOR OVERHAUL KIT GA55\u207a-90<\/td>\n<\/tr>\n \n Supersedes<\/td>\n 2901191011, 2901191001<\/td>\n<\/tr>\n \n Origem<\/td>\n SER<\/td>\n<\/tr>\n \n Tarrif<\/td>\n 84825000<\/td>\n<\/tr>\n \n Largura<\/td>\n 160 mm<\/td>\n<\/tr>\n \n Altura<\/td>\n 130 mm<\/td>\n<\/tr>\n \n Comprimento<\/td>\n 260 mm<\/td>\n<\/tr>\n \n Peso<\/td>\n 3402 gr<\/td>\n<\/tr>\n \n Price (as recorded)<\/td>\n 1700.00 EUR<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n 
The Separate Fan Reference 9820 6852 00<\/h2>\n
What the Overhaul Restores on a GA55\u207a-90 Motor<\/h2>\n