{"id":5204,"date":"2026-11-20T12:56:17","date_gmt":"2026-11-20T04:56:17","guid":{"rendered":"https:\/\/www.ccompressor.com\/?post_type=product&p=5204"},"modified":"2026-11-20T15:37:39","modified_gmt":"2026-11-20T07:37:39","slug":"3002600350-non-drive-kit","status":"publish","type":"product","link":"https:\/\/www.ccompressor.com\/es\/product\/3002600350-non-drive-kit\/","title":{"rendered":"3002600350: ATLAS COPCO MOTOR NON DRIVE SIDE KIT"},"content":{"rendered":"
The Atlas Copco 3002600350 is the motor non-drive-side kit for oil-injected screw compressors. It is a small repair set rather than a complete motor: the 3002600350 restores the bearing support and the sealing at the end of the motor opposite the drive coupling. The kit appears in the motor repair sections of the fixed-speed GA 55 \/ GA 75 catalogue and the GA 55+ \/ GA 75+ \/ GA 90 catalogue, and it is also listed for the GA 55 VSD, GA 75 VSD and GA 90 VSD machines. One number covers all of them. The recorded set weighs 1.3 kg and measures 205 x 205 x 125 mm.<\/p>\n
The 3002600350 is defined by its four-line bill of materials, and each piece has a distinct job at the non-drive end. The ball bearing, quantity one, carries the rotor weight and locates the shaft at the end away from the coupling. The external circlip, quantity one, seats in the shaft groove and holds the bearing inner race against axial movement. The second retaining ring is listed specifically as CIRCLIP-DIN471-75X2.5, quantity one, a 75 mm shaft ring with a 2.5 mm section that differs from the external circlip and is not interchangeable with it. The seal lip, quantity one, closes the housing against grease loss and contamination at the same end.<\/p>\n
Because the kit mixes two different circlips, an outer clip and a DIN471-75X2.5 internal ring, the 3002600350 is not a generic bearing pack. Buyers replacing a single ring from a mixed box can end up with the wrong clip seated in the wrong groove. The set is recorded at 1.3 kg on a 205 x 205 x 125 mm envelope, a flat, square footprint that reflects the small parts count rather than a full motor assembly.<\/p>\n The most useful fact about 3002600350 is what does not change. In the GA 55 and GA 75 fixed-speed group, the motor repair set is 3002600330, the drive-side kit is 3002600340, the non-drive-side kit is 3002600350, and the fan kit is 1092026400. In the GA 55+, GA 75+ and GA 90 group, the rebearing kit changes to 3002600360 and the drive-side kit changes to 3002600370, yet the non-drive-side kit stays 3002600350 and the fan kit stays 1092026400. The bearing and drive ends split into two part-number families; the non-drive end does not.<\/p>\n The VSD catalogue repeats the same pattern. For the GA 55 VSD machine the listed set is 3002600330 with drive side 3002600340 and non-drive side 3002600350. For the GA 75 VSD and GA 90 VSD machines the rebearing kit is 3002600360 with drive side 3002600370, and the non-drive side is once again 3002600350. Whether the motor belongs to the older fixed-speed range or the VSD range, the part you need at the non-drive end carries the same number. A working example of the platform this kit serves is the Atlas Copco GA 90 (FF 90\u207a) oil-injected air compressor<\/a>.<\/p>\n This is why identifying the end of the motor matters more than identifying the machine when you order 3002600350. The same kit can serve a GA 55, a GA 75+, a GA 55 VSD or a GA 90 VSD, provided the work is at the non-drive side. The catalogue groups the other three kits by motor family, but it deliberately leaves the non-drive-side kit shared.<\/p>\n
One Non-Drive-Side Number Across Two Rebearing Families<\/h2>\n

Specification Summary<\/h2>\n