{"id":5178,"date":"2026-11-18T12:07:17","date_gmt":"2026-11-18T04:07:17","guid":{"rendered":"https:\/\/www.ccompressor.com\/?post_type=product&p=5178"},"modified":"2026-11-18T14:07:48","modified_gmt":"2026-11-18T06:07:48","slug":"atlas-copco-zt-22-vsd-ff-vsd%e2%81%ba-oil-free-tooth-air-compressor","status":"publish","type":"product","link":"https:\/\/www.ccompressor.com\/es\/product\/atlas-copco-zt-22-vsd-ff-vsd%e2%81%ba-oil-free-tooth-air-compressor\/","title":{"rendered":"Atlas Copco ZT 22 VSD (FF VSD\u207a) Oil-free Tooth Air Compressor"},"content":{"rendered":"
The Atlas Copco ZT 22 VSD is an unusual entry in the oil-free tooth range because the two halves of its specification do not mirror each other. On the fixed-speed side the 22 kW air-cooled frame is printed at three discharge pressures \u2014 7.5, 8.6 and 10 bar(e) \u2014 each with its own free air delivery. On the variable-speed side the official table carries only one machine, the ZT22VSD-10, and that single row covers the whole 4 to 10 bar(e) working range. There is no separate 8.6 bar(e) variable-speed print at this size, and the ZR\/ZT 30-50 VSD\u207a booklet begins at 30 kW, so the 22 kW stepping never offers the permanent-magnet VSD\u207a build that its larger siblings do.<\/p>\n
That arrangement makes the model a study in how one pressure class can be stretched. The ZT22VSD-10 is rated at 22 kW and 69 dB(A), and its row lists both ID and IMD as integrated dryer options. The fixed-speed ZT 22 – 7.5, ZT 22 – 8.6 and ZT 22 – 10 share the same 22 kW motor and the same 69 dB(A) noise figure, changing only their delivered flow as pressure climbs. A buyer comparing the two lines is therefore not choosing between different motors or different noise envelopes; the choice is between a machine that holds one nominal pressure and a machine that varies its speed to follow demand across the full band.<\/p>\n
Atlas Copco ZT 22 VSD (1)<\/p>\n
The variable-speed row is published at three working points rather than one. At the minimum pressure of 4 bar(e) the ZT22VSD-10 delivers between 24.9 and 60.1 l\/s, or 1.5 to 3.6 m\u00b3\/min. At the effective point of 7 bar(e) the band narrows slightly to 23.6 – 58.8 l\/s and 1.4 – 3.5 m\u00b3\/min. At the maximum of 10 bar(e) it settles at 22.2 – 48.8 l\/s and 1.3 – 2.9 m\u00b3\/min. The upper end of each band is the flow the machine reaches at full speed for that pressure, while the lower end is where the drive is still able to hold the setpoint before it drops out of regulation.<\/p>\n
| Working point<\/th>\n | Pressure bar(e)<\/th>\n | FAD l\/s<\/th>\n | FAD m\u00b3\/min<\/th>\n<\/tr>\n<\/thead>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M\u00ednimo<\/td>\n | 4<\/td>\n | 24.9 – 60.1<\/td>\n | 1.5 – 3.6<\/td>\n<\/tr>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Eficaz<\/td>\n | 7<\/td>\n | 23.6 – 58.8<\/td>\n | 1.4 – 3.5<\/td>\n<\/tr>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| M\u00e1ximo<\/td>\n | 10<\/td>\n | 22.2 – 48.8<\/td>\n | 1.3 – 2.9<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Read across the row, the numbers describe a machine that trades peak volume for pressure headroom in a predictable way. At 7 bar(e) the ZT22VSD-10 still reaches 58.8 l\/s at its top end, only marginally below the 60.1 l\/s it can show at 4 bar(e). By 10 bar(e) that top end has fallen to 48.8 l\/s, a reduction that reflects the extra work of compressing to the class ceiling rather than any change in the drive. Plants that run most of their hours near 7 bar(e) therefore keep almost the whole flow capability of the low-pressure setting while retaining the ability to push to 10 bar(e) when a utility loop calls for it.<\/p>\n
Fixed-Speed Delivery at 50 Hz<\/h2>\nBecause the variable-speed build prints only one pressure, the three fixed-speed rows are the clearest way to see what the same 22 kW element does when it is locked to a single duty. At 50 Hz the ZT 22 – 7.5 delivers 61.1 l\/s, or 3.7 m\u00b3\/min and 129.5 cfm at 7.5 bar(e). Raising the class to 8.6 bar(e) on the ZT 22 – 8.6 brings 55.4 l\/s, 3.3 m\u00b3\/min and 114.4 cfm. At 10 bar(e) the ZT 22 – 10 returns 49.4 l\/s, 3.0 m\u00b3\/min and 96.7 cfm. All three rows carry the same 22 kW and 30 hp installed motor and the same 69 dB(A) level.<\/p>\n
|