{"id":5019,"date":"2026-11-03T10:18:53","date_gmt":"2026-11-03T02:18:53","guid":{"rendered":"https:\/\/www.ccompressor.com\/?post_type=product&p=5019"},"modified":"2026-11-03T14:35:51","modified_gmt":"2026-11-03T06:35:51","slug":"atlas-copco-zt-200-vsd-imd-vsd%e2%81%ba-oil-free-air-compressor","status":"publish","type":"product","link":"https:\/\/www.ccompressor.com\/es\/product\/atlas-copco-zt-200-vsd-imd-vsd%e2%81%ba-oil-free-air-compressor\/","title":{"rendered":"Atlas Copco ZT 200 VSD (iMD VSD\u207a) Oil-free Air Compressor"},"content":{"rendered":"

The Atlas Copco ZT 200 VSD is the air-cooled, two-stage oil-free screw compressor in the 200 kW (268 hp) class of the ZR\/ZT 160-315 (VSD) range. One article covers the whole family: the current Pack build, the FF (iMD) build with an integrated heat-of-compression dryer, and the ZT 200 VSD+ branch in Pack and FF (iMD) forms. Because the NEOS inverter synthesizes its own motor frequency, the published performance applies to 50 Hz and 60 Hz plants in one table per build. Air passes filtration and the first compression stage, crosses the intercooler with its moisture separation system, and reaches the final pressure in the second stage.<\/p>\n

Ambient air carries away the compression heat, so the ZT line installs where a cooling water circuit does not exist or cannot be extended. Class 0 certification under ISO 8573-1 (2010) keeps oil contamination out of food, textile, medical, and electronics processes, and the variable speed drive follows the demand curve instead of cycling between load and unload.<\/p>\n

Turn-down shapes the daily value of the ZT 200 VSD. On the 8.6 bar(e) variant the flow modulates from 637 l\/s at full speed down to 192 l\/s at the top pressure setting, so a plant whose air demand swings between shifts never forces the package to blow surplus air to atmosphere. The network pressure band stays narrow, downstream equipment sees a steady supply, and fewer load and unload cycles ease the wear on elements, motor, and switchgear.<\/p>\n

\"Atlas
Atlas Copco ZT 200 VSD\u207a (2)<\/figcaption><\/figure>\n

Especificaciones t\u00e9cnicas<\/h2>\n

Performance follows ISO 1217, Annex E, Edition 4 (2009), with FAD measured at the effective working pressure of each setting. The Pack table lists the two factory variants, 8.6 and 10.4 bar(e), each shown at its minimum, effective, and maximum pressure setting.<\/p>\n\n\n\n\n\n\n\n\n\n
Modelo<\/th>\nSetting<\/th>\nbar(e)<\/th>\npsig<\/th>\nCapacidad FAD l\/s<\/th>\nm\u00b3\/min<\/th>\ncfm<\/th>\nPotencia del motor instalado (kW)<\/th>\nhp<\/th>\nRuido en dB(A)<\/th>\nPeso (kg)<\/th>\n<\/tr>\n
ZT 200 VSD \u2013 8.6<\/td>\nM\u00ednimo<\/td>\n4<\/td>\n58<\/td>\n195 \u2013 637<\/td>\n11.7 \u2013 38.2<\/td>\n414 \u2013 1350<\/td>\n200<\/td>\n268<\/td>\n75<\/td>\n6162<\/td>\n<\/tr>\n
ZT 200 VSD \u2013 8.6<\/td>\nEficaz<\/td>\n7<\/td>\n102<\/td>\n193 \u2013 608<\/td>\n11.6 \u2013 36.5<\/td>\n410 \u2013 1289<\/td>\n200<\/td>\n268<\/td>\n75<\/td>\n6162<\/td>\n<\/tr>\n
ZT 200 VSD \u2013 8.6<\/td>\nM\u00e1ximo<\/td>\n8.6<\/td>\n125<\/td>\n192 \u2013 544<\/td>\n11.5 \u2013 32.7<\/td>\n407 \u2013 1153<\/td>\n200<\/td>\n268<\/td>\n75<\/td>\n6162<\/td>\n<\/tr>\n
ZT 200 VSD \u2013 10.4<\/td>\nM\u00ednimo<\/td>\n6<\/td>\n87<\/td>\n190 \u2013 530<\/td>\n11.4 \u2013 31.8<\/td>\n404 \u2013 1123<\/td>\n200<\/td>\n268<\/td>\n72<\/td>\n6162<\/td>\n<\/tr>\n
ZT 200 VSD \u2013 10.4<\/td>\nEficaz<\/td>\n9<\/td>\n131<\/td>\n188 \u2013 529<\/td>\n11.3 \u2013 31.7<\/td>\n398 \u2013 1120<\/td>\n200<\/td>\n268<\/td>\n72<\/td>\n6162<\/td>\n<\/tr>\n
ZT 200 VSD \u2013 10.4<\/td>\nM\u00e1ximo<\/td>\n10.4<\/td>\n151<\/td>\n187 \u2013 482<\/td>\n11.2 \u2013 28.9<\/td>\n396 \u2013 1022<\/td>\n200<\/td>\n268<\/td>\n72<\/td>\n6162<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The Pack build measures 4438 mm long, 1760 mm wide, and 2150 mm high. The 8.6 bar(e) variant reads 75 dB(A) and the 10.4 bar(e) variant 72 dB(A) at the work station, both served by the same 200 kW (268 hp) permanent magnet motor. A blow off valve and two pressure relief valves after the moisture separator protect the package across the whole envelope.<\/p>\n

The FF (iMD) Build with Integrated Dryer<\/h2>\n

The FF (iMD) build integrates a heat-of-compression adsorption dryer in the same frame. Around sixty percent of the flow crosses the aftercooler while the hot balance regenerates the adsorption drum, and dry air leaves the outlet flange with no separate dryer vessel row. The dryer raises the minimum setting to 6 bar(e), which the FF tables reflect on both variants.<\/p>\n\n\n\n\n\n\n\n\n\n
Modelo<\/th>\nSetting<\/th>\nbar(e)<\/th>\npsig<\/th>\nCapacidad FAD l\/s<\/th>\nm\u00b3\/min<\/th>\ncfm<\/th>\nPotencia del motor instalado (kW)<\/th>\nhp<\/th>\nRuido en dB(A)<\/th>\nPeso (kg)<\/th>\n<\/tr>\n
ZT 200 VSD FF (iMD) \u2013 8.6<\/td>\nM\u00ednimo<\/td>\n6<\/td>\n87<\/td>\n194 \u2013 636<\/td>\n11.6 \u2013 38.2<\/td>\n411 \u2013 1348<\/td>\n200<\/td>\n268<\/td>\n75<\/td>\n7159<\/td>\n<\/tr>\n
ZT 200 VSD FF (iMD) \u2013 8.6<\/td>\nEficaz<\/td>\n7<\/td>\n102<\/td>\n193 \u2013 602<\/td>\n11.6 \u2013 36.1<\/td>\n410 \u2013 1275<\/td>\n200<\/td>\n268<\/td>\n75<\/td>\n7159<\/td>\n<\/tr>\n
ZT 200 VSD FF (iMD) \u2013 8.6<\/td>\nM\u00e1ximo<\/td>\n8.6<\/td>\n125<\/td>\n192 \u2013 540<\/td>\n11.5 \u2013 32.4<\/td>\n407 \u2013 1145<\/td>\n200<\/td>\n268<\/td>\n75<\/td>\n7159<\/td>\n<\/tr>\n
ZT 200 VSD FF (iMD) \u2013 10.4<\/td>\nM\u00ednimo<\/td>\n6<\/td>\n87<\/td>\n190 \u2013 530<\/td>\n11.4 \u2013 31.8<\/td>\n403 \u2013 1122<\/td>\n200<\/td>\n268<\/td>\n72<\/td>\n7159<\/td>\n<\/tr>\n
ZT 200 VSD FF (iMD) \u2013 10.4<\/td>\nEficaz<\/td>\n9<\/td>\n131<\/td>\n188 \u2013 525<\/td>\n11.3 \u2013 31.5<\/td>\n398 \u2013 1113<\/td>\n200<\/td>\n268<\/td>\n72<\/td>\n7159<\/td>\n<\/tr>\n
ZT 200 VSD FF (iMD) \u2013 10.4<\/td>\nM\u00e1ximo<\/td>\n10.4<\/td>\n151<\/td>\n187 \u2013 481<\/td>\n11.2 \u2013 28.9<\/td>\n396 \u2013 1020<\/td>\n200<\/td>\n268<\/td>\n72<\/td>\n7159<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The integrated dryer stretches the frame to 4962 mm while width and height hold at 1760 and 2150 mm, and packaged weight rises to 7159 kg. Factory-completed wiring and piping between compressor and dryer remove field plumbing and the pressure drop of external connections.<\/p>\n

\"Atlas
Atlas Copco ZT 200 VSD\u207a (3)<\/figcaption><\/figure>\n

The ZT 200 VSD+ Branch<\/h2>\n

The ZT 200 VSD+ build carries its own Pack enclosure at 4417 mm long, 1754 mm wide, and 2150 mm high, offered as a single 10.4 bar(e) variant with a 78 dB(A) noise level.<\/p>\n\n\n\n\n\n\n
Modelo<\/th>\nSetting<\/th>\nbar(e)<\/th>\npsig<\/th>\nCapacidad FAD l\/s<\/th>\nm\u00b3\/min<\/th>\ncfm<\/th>\nPotencia del motor instalado (kW)<\/th>\nhp<\/th>\nRuido en dB(A)<\/th>\nPeso (kg)<\/th>\n<\/tr>\n
ZT 200 VSD+ \u2013 10.4<\/td>\nM\u00ednimo<\/td>\n4<\/td>\n58<\/td>\n187 \u2013 662<\/td>\n11.0 \u2013 40.0<\/td>\n397 \u2013 1402<\/td>\n200<\/td>\n268<\/td>\n78<\/td>\n6560<\/td>\n<\/tr>\n
ZT 200 VSD+ \u2013 10.4<\/td>\nEficaz<\/td>\n7<\/td>\n100<\/td>\n186 \u2013 622<\/td>\n11.0 \u2013 37.0<\/td>\n394 \u2013 1319<\/td>\n200<\/td>\n268<\/td>\n78<\/td>\n6560<\/td>\n<\/tr>\n
ZT 200 VSD+ \u2013 10.4<\/td>\nM\u00e1ximo<\/td>\n10.4<\/td>\n150<\/td>\n181 \u2013 481<\/td>\n11.0 \u2013 29.0<\/td>\n383 \u2013 1020<\/td>\n200<\/td>\n268<\/td>\n78<\/td>\n6560<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The ZT 200 VSD+ FF (iMD) form adds the integrated dryer to that platform: 210 to 611 l\/s at the 7 bar(e) effective setting, the same 78 dB(A) level, and 7792 kg packaged on a 5348 by 1754 by 2200 mm footprint. Sites weighing the two branches balance the wider turn-down of the VSD+ build against the current machine’s lower noise level and its two-variant pressure choice.<\/p>\n

\"Atlas
Atlas Copco ZT 200 VSD\u207a (4)<\/figcaption><\/figure>\n

Inside the Package<\/h2>\n

Two next-generation compression elements with superior rotor coating divide the pressure between the stages, and the gear drive runs in filtered, temperature-controlled oil. The NEOS inverter adjusts motor speed continuously for energy savings of up to 35 percent against fixed speed operation, and the permanent magnet motor keeps its efficiency class across that speed span.<\/p>\n

The Elektronikon Mk5 Touch controller handles warning indications, maintenance scheduling, and online condition visualization. A bearing life monitor works independently of compressor speed, the IP54 cubicle shields the electrical section, and the cooler block with its highly efficient water separator holds performance over the years. Energy recovery turns up to 94 percent of the electrical input into hot water for processes or space heating.<\/p>\n

The air path inside the ZT 200 VSD is arranged for minimal pressure drop: intake air crosses the air filter and inlet valve, passes the pulsation dampener into the first stage, and flows through the intercooler with its moisture separation system and automated drains before the second stage. Zero-loss drains clear condensate without wasting compressed air, the soundproof canopy keeps the surrounding area usable, and grouped service items shorten every maintenance stop.<\/p>\n

Where the ZT 200 VSD Fits<\/h2>\n

Plants without cooling water gain the most: the air-cooled circuit installs outdoors or in annex spaces where a water-cooled machine would need civil work. The drive absorbs batch changes and shift patterns without unload blow-off, and mixed-demand sites consolidate several fixed speed units into one machine. For a step up in capacity on the same air-cooled platform, the Atlas Copco ZT 250 VSD Oil-free Air Compressor<\/a> extends the envelope to 767 l\/s in the adjacent 250 kW class.<\/p>\n

Engineering teams that stage their capacity also fit the ZT 200 VSD into a multi-machine room: the central controller groups the package with existing fixed speed units, trims the average pressure band, and hands the trim duty to the variable speed machine while base machines run at their efficient full-load point. Options such as a silicone-free rotor, high ambient versions, and witnessed performance testing adapt the package to demanding sites.<\/p>\n

\"Atlas
Atlas Copco ZT 200 VSD\u207a (5)<\/figcaption><\/figure>\n

ZT 200 VSD FAQ<\/h2>\n

How does the ZT reject its heat?<\/strong><\/p>\n

Ambient air crosses the intercooler, aftercooler, and oil cooler circuits, so the machine needs no cooling tower, water treatment, or condensate handling on the cooling side.<\/p>\n

What does the capacity envelope look like?<\/strong><\/p>\n

The 8.6 bar(e) variant spans 192 to 637 l\/s (407 to 1350 cfm) across its settings, and the 10.4 bar(e) variant covers 187 to 530 l\/s.<\/p>\n

Why does the FF (iMD) table start at 6 bar(e)?<\/strong><\/p>\n

The heat-of-compression dryer needs a minimum circuit pressure to regenerate its adsorption drum, so the minimum setting rises from 4 to 6 bar(e) on the integrated build.<\/p>\n

What separates the ZT 200 VSD+ from the current build?<\/strong><\/p>\n

The VSD+ branch comes as one 10.4 bar(e) variant with a 4417 mm Pack frame, 78 dB(A), and a turn-down that reaches 181 l\/s at the bottom of its envelope.<\/p>\n

Can the machine stand outdoors?<\/strong><\/p>\n

Yes, the coated canopy, sealed cubicle, and grouped service points suit outdoor installation, and sites in extreme climates should confirm the ambient version option.<\/p>\n

Which industries take the ZT line?<\/strong><\/p>\n

Food and beverage, pharmaceutical, textile, chemical, and electronics plants use the Class 0 oil-free air for direct contact, instruments, and pneumatic transport.<\/p>","protected":false},"excerpt":{"rendered":"

Two-stage oil-free compression in an air-cooled 200 kW (268 hp) variable speed package \u2014 the current Atlas Copco ZT 200 VSD with Pack and FF (iMD) builds, plus the ZT 200 VSD+ branch \u2014 covering 8.6 and 10.4 bar(e) variants. Send Sekes the model and the working pressure your network carries, and we will match the right variant and reply with the quotation.<\/strong><\/p>","protected":false},"featured_media":5013,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"parts-accessories":[],"service-intervals":[],"product_brand":[43],"product_cat":[101],"product_tag":[46,152],"class_list":["post-5019","product","type-product","status-publish","has-post-thumbnail","product_brand-atlas-copco","product_cat-oil-free-air-compressors","product_tag-screw-air-compressors","product_tag-zr-zt-series","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/product\/5019","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/comments?post=5019"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/media\/5013"}],"wp:attachment":[{"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/media?parent=5019"}],"wp:term":[{"taxonomy":"parts-accessories","embeddable":true,"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/parts-accessories?post=5019"},{"taxonomy":"service-intervals","embeddable":true,"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/service-intervals?post=5019"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/product_brand?post=5019"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/product_cat?post=5019"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.ccompressor.com\/es\/wp-json\/wp\/v2\/product_tag?post=5019"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}