\n| ZT37VSD-10<\/td>\n | \u0627\u0644\u062d\u062f \u0627\u0644\u0623\u0642\u0635\u0649<\/td>\n | 10<\/td>\n | 32.5\u201380.5<\/td>\n | 2.0\u20134.8<\/td>\n | 76<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Dryer integration splits along the two tiers. Atlas Copco lists ID \/ IMD integrated-dryer availability for the 8.6 bar(e) ZT37VSD, while the 10 bar(e) build is listed with ID only. Both versions weigh 1400 kg and share a 76 dB(A) noise level, figures that place the standard VSD line a clear step above the ZT 37 VSD\u207a in mass and sound. For a workshop where the compressor room sits close to assembly benches, that 76 dB(A) rating is worth checking against local exposure limits before ordering.<\/p>\n The ZT 37 VSD\u207a Drive Package<\/h2>\nThe ZT 37 VSD\u207a belongs to the ZR\/ZT 30-50 VSD\u207a tooth family, where a permanent-magnet IE5 drive package takes over flow control. Its noise level drops to 69 dB(A) and the pack weight to 1350 kg, so the premium drive buys back 50 kg and 7 dB(A) against the standard VSD frame. Atlas Copco rates the installed motor at 37 kW (50 hp) for this family, and ID \/ IMD integrated-dryer availability carries over both pressure classes. Working pressures in the imperial tables run from 58 psig at the minimum point to 125 psig at the 8.6 bar(e) maximum, and to 145 psig on the 10 bar(e) build.<\/p>\n Atlas Copco ZT 37 VSD\u207a FF (2)<\/figcaption><\/figure>\n8.6 bar(e) Coverage on the ZT 37 VSD\u207a<\/h3>\nAcross the three reference points of the 8.6 bar(e) class, the ZT37VSD+-8.6 moves 40.4\u2013112.6 l\/s (2.4\u20136.7 m\u00b3\/min) at 4 bar(e), 39.9\u2013110.1 l\/s (2.3\u20136.6 m\u00b3\/min) at the 7 bar(e) effective point, and 37.9\u201395.6 l\/s (2.2\u20135.7 m\u00b3\/min) at 8.6 bar(e). In cfm terms the printed window runs 85.5\u2013238.5, 83.2\u2013223.4 and 80.3\u2013202.6 across those same points. The top of this range, 112.6 l\/s, is the highest minimum-point flow of any 37 kW build in the tooth lineup.<\/p>\n \n\n\n| \u0627\u0644\u0637\u0631\u0627\u0632<\/th>\n | Point<\/th>\n | \u0636\u063a\u0637 \u0627\u0644\u062a\u0634\u063a\u064a\u0644 (\u0628\u0627\u0631)<\/th>\n | FAD (l\/s)<\/th>\n | FAD (m\u00b3\/min)<\/th>\n | \u0645\u0633\u062a\u0648\u0649 \u0627\u0644\u0636\u0648\u0636\u0627\u0621 \u062f\u064a\u0633\u064a\u0628\u0644 (A)<\/th>\n<\/tr>\n | \n| ZT37VSD+-8.6<\/td>\n | \u0627\u0644\u062d\u062f \u0627\u0644\u0623\u062f\u0646\u0649<\/td>\n | 4<\/td>\n | 40.4\u2013112.6<\/td>\n | 2.4\u20136.7<\/td>\n | 69<\/td>\n<\/tr>\n | \n| ZT37VSD+-8.6<\/td>\n | \u0627\u0644\u0641\u0639\u0627\u0644\u064a\u0629<\/td>\n | 7<\/td>\n | 39.9\u2013110.1<\/td>\n | 2.3\u20136.6<\/td>\n | 69<\/td>\n<\/tr>\n | \n| ZT37VSD+-8.6<\/td>\n | \u0627\u0644\u062d\u062f \u0627\u0644\u0623\u0642\u0635\u0649<\/td>\n | 8.6<\/td>\n | 37.9\u201395.6<\/td>\n | 2.2\u20135.7<\/td>\n | 69<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Atlas Copco ZT 37 VSD\u207a FF (3)<\/figcaption><\/figure>\n10 bar(e) Coverage on the ZT 37 VSD\u207a<\/h3>\nThe 10 bar(e) class of the ZT 37 VSD\u207a keeps the same 40.4\u2013112.6 l\/s (2.4\u20136.7 m\u00b3\/min) minimum-point window, then compresses the flow band as pressure rises: 37.7\u201392.5 l\/s (2.3\u20135.5 m\u00b3\/min) at the 9 bar(e) effective point and 36.9\u201384.9 l\/s (2.2\u20135.09 m\u00b3\/min) at the 10 bar(e) maximum. The printed cfm windows are 85.5\u2013238.5, 79.8\u2013196.1 and 78.1\u2013179.9. Because the effective point sits at 9 bar(e), applications that cycle between 8 and 10 bar(e) get a reference point much closer to their real operating pressure than the 8.6 bar(e) class provides.<\/p>\n \n\n\n| \u0627\u0644\u0637\u0631\u0627\u0632<\/th>\n | Point<\/th>\n | \u0636\u063a\u0637 \u0627\u0644\u062a\u0634\u063a\u064a\u0644 (\u0628\u0627\u0631)<\/th>\n | FAD (l\/s)<\/th>\n | FAD (m\u00b3\/min)<\/th>\n | \u0645\u0633\u062a\u0648\u0649 \u0627\u0644\u0636\u0648\u0636\u0627\u0621 \u062f\u064a\u0633\u064a\u0628\u0644 (A)<\/th>\n<\/tr>\n | \n| ZT37VSD+10<\/td>\n | \u0627\u0644\u062d\u062f \u0627\u0644\u0623\u062f\u0646\u0649<\/td>\n | 4<\/td>\n | 40.4\u2013112.6<\/td>\n | 2.4\u20136.7<\/td>\n | 69<\/td>\n<\/tr>\n | \n| ZT37VSD+10<\/td>\n | \u0627\u0644\u0641\u0639\u0627\u0644\u064a\u0629<\/td>\n | 9<\/td>\n | 37.7\u201392.5<\/td>\n | 2.3\u20135.5<\/td>\n | 69<\/td>\n<\/tr>\n | \n| ZT37VSD+10<\/td>\n | \u0627\u0644\u062d\u062f \u0627\u0644\u0623\u0642\u0635\u0649<\/td>\n | 10<\/td>\n | 36.9\u201384.9<\/td>\n | 2.2\u20135.09<\/td>\n | 69<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Atlas Copco ZT 37 VSD\u207a FF (4)<\/figcaption><\/figure>\nMass and Footprint of the 37 kW Builds<\/h2>\nWeight data follows the family layout of the ZR\/ZT 30-50 VSD\u207a documentation, where the 30 and 37 kW frames share one printed pack mass and the 45 and 50 kW frames share another. For the ZT 37 VSD\u207a that shared value is 1350 kg in pack form, rising to 1610 kg as Full Feature (iMD) and 1504 kg as Full Feature (iD). The standard VSD machines weigh 1400 kg each.<\/p>\n Footprints differ as well. The standard ZT37VSD units sit in the ZT 30-55 VSD dimension group at 2440 \u00d7 1016 \u00d7 1880 mm, while the ZT 37 VSD\u207a fits the 2005 \u00d7 1022 \u00d7 1909 mm envelope of the ZR\/ZT 30-50 VSD\u207a family, growing to 2440 \u00d7 1022 \u00d7 1909 mm in Full Feature form.<\/p>\n \n\n\n| \u0627\u0644\u0628\u0646\u062f<\/th>\n | \u0627\u0644\u0642\u064a\u0645\u0629<\/th>\n<\/tr>\n | \n| ZT37VSD-8.6 \/ ZT37VSD-10 standard model weight<\/td>\n | 1400 kg<\/td>\n<\/tr>\n | \n| ZR\/ZT 37 VSD\u207a pack weight<\/td>\n | 1350 kg<\/td>\n<\/tr>\n | \n| ZR\/ZT 37 VSD\u207a Full Feature (iMD)<\/td>\n | 1610 kg<\/td>\n<\/tr>\n | \n| ZR\/ZT 37 VSD\u207a Full Feature (iD)<\/td>\n | 1504 kg<\/td>\n<\/tr>\n | \n| ZT 30-55 VSD dimension group (L \u00d7 W \u00d7 H)<\/td>\n | 2440 \u00d7 1016 \u00d7 1880 mm<\/td>\n<\/tr>\n | \n| ZR\/ZT 30-50 VSD\u207a footprint (L \u00d7 W \u00d7 H)<\/td>\n | 2005 \u00d7 1022 \u00d7 1909 mm<\/td>\n<\/tr>\n | \n| ZR\/ZT 30-50 VSD\u207a (FF) footprint (L \u00d7 W \u00d7 H)<\/td>\n | 2440 \u00d7 1022 \u00d7 1909 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\nWhere the ZT 37 VSD Fits the Plant Load<\/h2>\nAtlas Copco positions the ZR\/ZT tooth compressors for industries such as pharmaceutical manufacturing, packaging, food and beverage, electronics and automotive production, where a non-stop supply of high-quality oil-free air matters.<\/p>\n On a 37 kW frame this positioning turns concrete: a packaging hall that never drops below 40 l\/s of demand can hold the ZT37VSD-8.6 near its effective point of 41.3\u2013101.6 l\/s, while a plant running short high-pressure bursts will see the drive climb toward the 8.6 bar(e) maximum of 41.2\u201395.1 l\/s. For 10 bar(e) processes such as certain blowing or lab applications, the choice shifts to the two 10 bar(e) builds, and the deciding figures are the 32.5\u201380.5 l\/s maximum of the standard ZT37VSD-10 against the 36.9\u201384.9 l\/s maximum of the ZT 37 VSD\u207a.<\/p>\n Service planning also reads differently across the two lines. The standard ZT37VSD frame accepts the ID \/ IMD dryer combination on the 8.6 bar(e) tier, so a single cabinet can cover compression and drying where space is tight. The ZT 37 VSD\u207a extends that idea with Full Feature (iMD) and Full Feature (iD) pack weights already documented at 1610 kg and 1504 kg, which helps installers reserve floor loading capacity before the unit arrives. Checking the 76 dB(A) and 69 dB(A) noise ratings against the real position of the compressor room completes the picture.<\/p>\n \u0627\u0644\u0623\u0633\u0626\u0644\u0629 \u0627\u0644\u0645\u062a\u062f\u0627\u0648\u0644\u0629<\/h2>\nHow much air does the ZT37VSD-8.6 deliver at its top pressure?<\/strong> At the 8.6 bar(e) maximum point the official figure is 41.2\u201395.1 l\/s, equal to 2.5\u20135.7 m\u00b3\/min, with the machine weighing 1400 kg and offering ID \/ IMD dryer integration. That window narrows from the 42.4\u2013102.3 l\/s available at the 4 bar(e) minimum, which is normal behavior for a variable-speed tooth compressor as pressure climbs.<\/p>\nWhat separates the ZT37VSD-10 from the ZT 37 VSD\u207a 10 bar(e) build?<\/strong> Four printed figures draw the line: the standard build tops out at 32.5\u201380.5 l\/s against 36.9\u201384.9 l\/s for the VSD\u207a, its noise rating is 76 dB(A) instead of 69 dB(A), its weight is 1400 kg rather than the 1350 kg VSD\u207a pack, and its dryer listing is ID only versus ID \/ IMD. Buyers who need the quietest and highest-flowing 10 bar(e) option at 37 kW therefore look at the ZT 37 VSD\u207a first.<\/p>","protected":false},"excerpt":{"rendered":"Send us the working pressure and flow your process needs, and our team will confirm which Atlas Copco ZT 37 VSD build matches and prepare a quotation. From the 8.6 bar(e) ZT37VSD-8.6 to the 10 bar(e) ZT 37 VSD\u207a, every configuration of this 37 kW oil-free tooth compressor can be quoted against your real demand profile.<\/p>","protected":false},"featured_media":5140,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"parts-accessories":[],"service-intervals":[],"product_brand":[43],"product_cat":[101],"product_tag":[46,152],"class_list":["post-5145","product","type-product","status-publish","has-post-thumbnail","product_brand-atlas-copco","product_cat-oil-free-air-compressors","product_tag-screw-air-compressors","product_tag-zr-zt-series","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/product\/5145","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/comments?post=5145"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/media\/5140"}],"wp:attachment":[{"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/media?parent=5145"}],"wp:term":[{"taxonomy":"parts-accessories","embeddable":true,"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/parts-accessories?post=5145"},{"taxonomy":"service-intervals","embeddable":true,"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/service-intervals?post=5145"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/product_brand?post=5145"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/product_cat?post=5145"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.ccompressor.com\/ar\/wp-json\/wp\/v2\/product_tag?post=5145"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} | | | |